Nuts! Head nuts.... Acorn? Stainless?

[gavinnz]

I have been looking for stainless steel acorn nuts to fit the head studs but all I find are fake covers that go over the original nuts.

Does anyone sell proper acorn nuts in stainless for the flatheads head studs?
Or in chromed brass?

I have spent some time looking with no luck.....

I guess I could make them if I really wanted too....

[JSeery]

I think Flathead Jack did. They are/were pricey!

Looks like Red's may have them: http://reds-headers.com/html/fh_parts.html

http://reds-headers.com/html/external.html

[cas3]

industrial supply houses, like mc master carr. should have them. most likely have to do the polishing yourself

[Bob C]

Like cas3 said, McMaster Carr. https://www.mcmaster.com/acorn-nuts

[rockfla]

"General" commercial available SS will not withstand the torque values needed for flathead torques.....I have some 304SS 7-16-20 NF SS Acorn nuts (Maybe 40psi max torque) but have not and will not use them on a Flathead. With that said there "MAY BE" a company offering a "hardened" SS Acorn nut (like ARP) not sure BUT if so they will not be cheap and unless the seller can provide me with certs or mill test reports I would not trust them!!!!


NOTE: The above mentioned McMaster Carr items are the same as I have and IMO I would not recommend. Max torque value is 36ft/lb dry & 27ft/lb lubed. They are the standard commercial variety!!!

[gavinnz]

Sponsored Links (Register now to hide all advertisements)

They could be OK for aluminium heads? Torque of 35 to 40 I just read somewhere?

[gavinnz]

Looks to be just over 100US for a set.

[rockfla]

Originally Posted by gavinnz

They could be OK for aluminium heads? Torque of 35 to 40 I just read somewhere?

"Could"......is another word "possibly". Its a you're gamble with you're motor. Factoring in the head cycles and the "recommended" values I'm not that big of a gambler!!! Just my .02 worth!!!

[JSeery]

I would check with Red's and see what the torque values are for the ones they have.

[Dave/Green Bay]

Jaguar XKE head nuts work. Not Cheap. Dave Green Bay

[rockfla]

Originally Posted by JSeery

I would check with Red's and see what the torque values are for the ones they have.

According to the Red's page, theirs are "Chrome plated" which would indicate to me that they are a steel nut that is chrome plated?????, I see no mention of SS. I'm with JSeery, I would see what Red's charges for theirs IMO???

[19Fordy]

Save yourself tons of money and aggrivation.
Go with acorn nut covers like in the old days.

[95476]

Fastenall

[RKS.PA]

I'm with 19Fordy, go with the chrome plated covers and save yourself $$ and grief!! Torquing the heads is somewhat important....think I read this somewhere!

[gavinnz]

No fake nut covers for me. That just seems wrong.

[Jack E/NJ]

They're real nut covers. 8^) Jack E/NJ

[gavinnz]

Originally Posted by Jack E/NJ

They're real nut covers. 8^) Jack E/NJ

True!!

[Mike51Merc]

Not to mention having the proper threads. Oops, I mentioned it!

[51504bat]

I'm running covers on my 8ba that I got from Patrick's (before he went sideways). Used a bit of silicon to make sure they stayed on. No issues and IMO they don't look like covers.

[corvette8n]

My local hardware store carries the covers, a dab of silicone and they have been on for 3 years with no problems.