Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 02-18-2016, 03:23 PM   #1
Hitchhiker
Senior Member
 
Join Date: May 2010
Location: Seattle
Posts: 389
Default restoring a old roadster back to stock. Seattle

So I bought a old roadster body and would like to return it to stock. It has been a hot rod at one point, but I prefer stock or lightly modified cars, I believe you guys call them touring cars. I have a 95% stock banger powered model A widebed pickup I daily drive here in Seattle and I just love it. Anyways, I am here as I know you guys are more experts in the department I am about to undertake. I know a lot of you will wonder why I am doing this, I am young and have more time than money and I want to see this old body put back to her original graceful self. It will never be a fine point restored car. but I think with a little elbow grease I can save this thing and put her back on a stock frame. What I am hoping is that you guys can look past what it currently is and help me bring her back. I am going to need measurements I am sure, and lots of advice.

I'd like to learn to rivet like Ford and use that where appropriate. I am planning on ordering a stock brookville subframe and building it from there. the passenger side is in decent shape, It had been sitting on its side for about 40 years and the drivers side had a mice nest in it and it did considerable damage.

I would like to locate a quarter panel for the drivers side that I can splice with this one and have a good one. If I can't find one I will again try a brookville unit and I also need a good firewall.

I have already cut the welded shut doors loose and removed all the bondo over the trunk in preparation of cutting the trunk lid loose where it was welded shut.

So I guess my questions are has anyone used the brookville stock floor pans? how are they?

are there patches for my bad quarter panel available so I dont have to buy a 800 dollar quarter panel?

also thoughts on the door? should I look for a used one in better shape?

I hope this doesn't upset you guys as its not my intent. I truly want to bring this thing back from the dead and I think you guys will be happy to see her saved from this pile to the lady she once was.
Attached Images
File Type: jpg 20160215_141812.jpg (66.7 KB, 264 views)
File Type: jpg 20160216_101035.jpg (60.9 KB, 244 views)
File Type: jpg IMG_20160216_154934.jpg (47.7 KB, 228 views)
File Type: jpg IMG_20160216_171443.jpg (44.9 KB, 220 views)
__________________
Matt in Seattle

Last edited by Hitchhiker; 02-18-2016 at 03:33 PM.
Hitchhiker is offline   Reply With Quote
Old 02-18-2016, 03:51 PM   #2
WTSHNN
Senior Member
 
WTSHNN's Avatar
 
Join Date: May 2010
Location: Chicago
Posts: 1,413
Default Re: restoring a old roadster back to stock. Seattle

Good for saving something others would discard.

I'd look over this site as it contains a lot of detailed pictures about what you're doing.

http://www.abarnyard.com/roadster/roadster.shtml

-Tim
__________________
No one wants advice - only corroboration.
-John Steinbeck
WTSHNN is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 02-18-2016, 03:57 PM   #3
ronn
Senior Member
 
Join Date: Feb 2011
Location: NNNNNNNNJJJJJJJJJJ
Posts: 6,758
Default Re: restoring a old roadster back to stock. Seattle

Kudos to you. dont think anyone here will argue with what you are doing, rather encouraging really. Yes it's a lot of work, but you will be pleased in the end. If you are on a budget, I would do a searchon the bay for the qtr and door, etc. Much less money if you are handy then buying the brooksville parts.
Also folks on here will have some of the parts you need. If you're not in a hurry, you can buy the parts over time, as they become avail and as you have $. I was fortunate
this week to land about 5 parts I need for various projects through wtd adds I placed on various sites. I was stoked to find a horn cover for my Pierce, that was lost when the open car hauler went flying up the interstate!
Anyway, GL and dont be afraid to make a list of wtd items and post it in the swap section.
ronn is offline   Reply With Quote
Old 02-18-2016, 04:08 PM   #4
Gil Sissons
Senior Member
 
Join Date: Dec 2013
Location: No Cal
Posts: 224
Default Re: restoring a old roadster back to stock. Seattle

Hitchhiker
Sent you pm
Gil. NoCal
Gil Sissons is offline   Reply With Quote
Old 02-18-2016, 04:40 PM   #5
700rpm
Senior Member
 
700rpm's Avatar
 
Join Date: May 2010
Location: Portland, Oregon
Posts: 5,892
Default Re: restoring a old roadster back to stock. Seattle

Why not try for show car? You've got a lot of work ahead of you, so you may as well go for the top. Take your time, learn along the way (like we all do), measure advice carefully, and take pride in your project and your work. As a younger person, you have some time, and you are embarking on an adventure that may well influence not just the course of your life, but many others' as well.

Read lots of books, ask lots of questions, look at a bunch of cars (especially like the one you are working on), take lots of pictures, use original parts every time you can, and don't throw anything away, because you will need it somewhere, some time, during the project.. And don't give up!

Good luck, and keep us posted.
__________________
Ray Horton, Portland, OR


As you go through life, keep your eye on the donut, not the hole.
700rpm is offline   Reply With Quote
Old 02-18-2016, 04:47 PM   #6
txkhog
Member
 
Join Date: Nov 2015
Location: Texarkana, TX
Posts: 61
Default Re: restoring a old roadster back to stock. Seattle

Sponsored Links (Register now to hide all advertisements)
You may take some time and look around, you may find a nice complete running gear with a motor and trans in for cheap, left over from someone making a hot rod.

GDG
txkhog is offline   Reply With Quote
Old 02-18-2016, 05:34 PM   #7
40 Deluxe
Senior Member
 
Join Date: May 2010
Location: now Kuna, Idaho
Posts: 3,774
Default Re: restoring a old roadster back to stock. Seattle

Quote:
Originally Posted by 700rpm View Post
Why not try for show car? You've got a lot of work ahead of you, so you may as well go for the top.

Good luck, and keep us posted.
My thought would be to forget about the 'show car' thing. You are in for a lot of work (but enjoyable work) and will feel justifiably proud of it when done. So now you would take it to some show and have a bunch of self-proclaimed 'expert' nitpickers criticizing little details?? Why lay out huge dollars for the correct cotter keys in the brake linkage or the original air in the tires?! Plus getting a sore butt from sitting in a lawn chair all day! Just make it a 20-20 car and enjoy driving it!
40 Deluxe is offline   Reply With Quote
Old 02-18-2016, 05:50 PM   #8
Mitch//pa
BANNED
 
Join Date: May 2010
Location: Bucks County, PA
Posts: 11,454
Default Re: restoring a old roadster back to stock. Seattle

Very nice and keep us updated,,
I may know of a guy with some parts he wants to get rid of... If he still has them I will PM you...
Mitch//pa is offline   Reply With Quote
Old 02-18-2016, 06:05 PM   #9
700rpm
Senior Member
 
700rpm's Avatar
 
Join Date: May 2010
Location: Portland, Oregon
Posts: 5,892
Default Re: restoring a old roadster back to stock. Seattle

Quote:
Originally Posted by 40 Deluxe View Post
My thought would be to forget about the 'show car' thing. You are in for a lot of work (but enjoyable work) and will feel justifiably proud of it when done. So now you would take it to some show and have a bunch of self-proclaimed 'expert' nitpickers criticizing little details?? Why lay out huge dollars for the correct cotter keys in the brake linkage or the original air in the tires?! Plus getting a sore butt from sitting in a lawn chair all day! Just make it a 20-20 car and enjoy driving it!
Sorry. I don't agree. "Good enough" seldom is, and he (or someone else) will end up doing it over. In Hitchhiker's case, it sounds like he has the time and interest to do a good job, and I think it is worth encouraging that attitude. It doesn't take that much more to do a job right.
__________________
Ray Horton, Portland, OR


As you go through life, keep your eye on the donut, not the hole.
700rpm is offline   Reply With Quote
Old 02-18-2016, 06:11 PM   #10
mhsprecher
Senior Member
 
mhsprecher's Avatar
 
Join Date: Aug 2012
Location: Takoma Park, MD
Posts: 2,811
Default Re: restoring a old roadster back to stock. Seattle

Adding to the chorus. Congrats on saving another one. I can't add any more wisdom than already shared. To me, there is nothing better than resurrecting something like this.

Do look for existing running gear. I see it for sale occasionally and it might be a lot cheaper and easier.
mhsprecher is offline   Reply With Quote
Old 02-18-2016, 06:21 PM   #11
Tom Wesenberg
Senior Member
 
Tom Wesenberg's Avatar
 
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
Default Re: restoring a old roadster back to stock. Seattle

Good plan you have. Just keep doing the restoration to the best of your ability and budget and you'll soon be in the driver's seat of a nice roadster.
Tom Wesenberg is offline   Reply With Quote
Old 02-18-2016, 06:28 PM   #12
Bob C
Senior Member
 
Join Date: May 2010
Location: So Cal
Posts: 8,713
Default Re: restoring a old roadster back to stock. Seattle

You will want to look at this thread by Flop, he did what you want to do.
https://www.fordbarn.com/forum/showthread.php?t=72648
Good luck

Bob
Bob C is offline   Reply With Quote
Old 02-18-2016, 06:43 PM   #13
Big hammer
Senior Member
 
Join Date: Jun 2014
Location: Land of Lincoln
Posts: 3,114
Default Re: restoring a old roadster back to stock. Seattle

Good luck on your preservation it looks very do able! I am with post #6 in try to find a rolling chassis, that would get you where you want to be a lot faster !
Keep posting with you progress :-)
Big hammer is online now   Reply With Quote
Old 02-18-2016, 06:57 PM   #14
CarlG
Senior Member
 
CarlG's Avatar
 
Join Date: Nov 2010
Location: Anchorage, Alaska
Posts: 9,109
Default Re: restoring a old roadster back to stock. Seattle

This was posted in the Swap Meet a couple of weeks ago.

https://www.fordbarn.com/forum/showthread.php?t=188324

These pop up every now and then, would make a good start for your project.
__________________
Alaskan A's
Antique Auto Mushers of Alaska
Model A Ford Club of America
Model A Restorers Club
Antique Automobile Club of America
Mullins Owner's Club
CarlG is offline   Reply With Quote
Old 02-18-2016, 07:08 PM   #15
Hitchhiker
Senior Member
 
Join Date: May 2010
Location: Seattle
Posts: 389
Default Re: restoring a old roadster back to stock. Seattle

I forgot to say I have a complete stock front and rear axle and suspension. A 7:1 winfield head, intake, carb, cam, lightened flywheel and counterbalanced crank rebuilt engine. A trans. I just need a nice frame. and I'm off and running.

also when I mention "not a show car" I mean I'm not concerned with having the correct date coded parts for the car. I will of course build it with as much skill as I have.
__________________
Matt in Seattle
Hitchhiker is offline   Reply With Quote
Old 02-18-2016, 07:33 PM   #16
Jeff/Illinois
Senior Member
 
Jeff/Illinois's Avatar
 
Join Date: May 2010
Posts: 2,787
Default Re: restoring a old roadster back to stock. Seattle

Neat always worth saving a Roadster (or any Model A as far as that goes). Good luck to you keep us posted very interesting project you'll do well
Jeff/Illinois is offline   Reply With Quote
Old 02-18-2016, 07:45 PM   #17
JohnJoyo
Super Moderator
 
JohnJoyo's Avatar
 
Join Date: May 2010
Location: Austin, TX
Posts: 34
Default Re: restoring a old roadster back to stock. Seattle

This is great! Good for you bringing this one back to life. The Brookville parts are nice, quality is good. They're good folks so if you have any question about fitment or compatibility, they'll steer you right. Keep an eye on the classifieds section here, frames pop up with some regularity.
JohnJoyo is offline   Reply With Quote
Old 02-18-2016, 08:48 PM   #18
41plym
Member
 
Join Date: Oct 2010
Location: Ridgefield Washington
Posts: 87
Default Re: restoring a old roadster back to stock. Seattle

Here's one close by http://portland.craigslist.org/clk/pts/5453047570.html
41plym is offline   Reply With Quote
Old 02-18-2016, 09:00 PM   #19
mshmodela
Senior Member
 
mshmodela's Avatar
 
Join Date: Mar 2014
Location: Cleveland, Ohio
Posts: 2,763
Default Re: restoring a old roadster back to stock. Seattle

Thank you for saving something that is priceless --it will never be made again...
__________________
-Mike

Late 31' Ford Model A Tudor, Miss Daisy

I don't work on cars --I'm learning about my Model A.

Cleveland, Ohio
mshmodela is offline   Reply With Quote
Old 02-18-2016, 10:08 PM   #20
700rpm
Senior Member
 
700rpm's Avatar
 
Join Date: May 2010
Location: Portland, Oregon
Posts: 5,892
Default Re: restoring a old roadster back to stock. Seattle

Quote:
Originally Posted by Hitchhiker View Post
I forgot to say I have a complete stock front and rear axle and suspension. A 7:1 winfield head, intake, carb, cam, lightened flywheel and counterbalanced crank rebuilt engine. A trans. I just need a nice frame. and I'm off and running.

also when I mention "not a show car" I mean I'm not concerned with having the correct date coded parts for the car. I will of course build it with as much skill as I have.
Good plan.
__________________
Ray Horton, Portland, OR


As you go through life, keep your eye on the donut, not the hole.
700rpm is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 06:20 PM.