51 Mercury Flathead and T5 setup complete

[rcnut223]

Here is a complete 51 Mercury flathead , borg beck clutch setup and a T5 transmission.

This is a running 51 mercury flathead pulled from a restored 52 mercury (in favor of a small
Block)

I have videos of the engine running. Pan timing cover and rear main seals replaced . I wide belt system has been installed , along with new water pumps and belts. New old stock fan bearing setup installed as well.

The clutch and adapter : flywheel turned , new ring gear installed . All clutch components are new . Flywheel pressure plate throwout and pilot bearings . Nos clutch rod and pin

Adapter is speedway , throwout return spring installed. All have been assembled and tested.

T5 is from an s10 , non world class with geared speedometer. Solid , All has been inspected and new seals installed .


I sold the 32 coupe this was going in, now this has to go. 3500.00 try to find , source parts and a fit this setup. this is what it cost me , and the labor was free.

Please contact me with questions , yes I am negotiable . I prefer not to split.

Try to gather assemble and do this for my asking price .

I will ship world wide

Mike
715-Five 86-zero267