The Ford Barn

B-O-B · 01-26-2019, 08:05 PM

cutoff wheel is your friend.

cas3 · 01-26-2019, 10:09 PM

i dont recall taking one apart that is as stuck as yours, but i believe the back gear, first gear must slide on the splines to get the bearing completely into the case for removing the main shaft assembly. if your bearing has stopped moving, check to see if that back gear is hitting something to stop all movement. you may have to get that gear loose too

Clem Clement · 01-27-2019, 12:37 PM

The main shaft is frozen as one peace. I'd like to remove the 7046 small snap ring and see what comes out.

cas3 · 01-27-2019, 01:24 PM

7046?

Clem Clement · 01-27-2019, 02:22 PM

sorry; 7064. Small ring on the front shaft

01-26-2019, 08:05 PM	#41
B-O-B Senior Member Join Date: May 2010 Location: Ft Mohave,Az Posts: 1,987	Re: Removing a snap ring cutoff wheel is your friend.

01-26-2019, 10:09 PM	#42
cas3 Senior Member Join Date: Jan 2011 Location: sw minnesota Posts: 4,574	Re: Removing a snap ring i dont recall taking one apart that is as stuck as yours, but i believe the back gear, first gear must slide on the splines to get the bearing completely into the case for removing the main shaft assembly. if your bearing has stopped moving, check to see if that back gear is hitting something to stop all movement. you may have to get that gear loose too

01-27-2019, 12:37 PM	#43
Clem Clement Senior Member Join Date: May 2010 Location: Fairfax, VA Posts: 3,393	Re: Removing a snap ring The main shaft is frozen as one peace. I'd like to remove the 7046 small snap ring and see what comes out.

01-27-2019, 01:24 PM	#44
cas3 Senior Member Join Date: Jan 2011 Location: sw minnesota Posts: 4,574	Re: Removing a snap ring 7046?

01-27-2019, 02:22 PM	#45
Clem Clement Senior Member Join Date: May 2010 Location: Fairfax, VA Posts: 3,393	Re: Removing a snap ring sorry; 7064. Small ring on the front shaft