|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
11-14-2016, 08:12 PM | #1 |
Junior Member
Join Date: Jan 2012
Location: Michigan
Posts: 12
|
1953 Truck 6 Cylinder
Hi guys I am hoping someone can help me with a problem I am having tearing down a 1953, 215 cid, 6 cylinder. I am trying to seperate the head from the block but, there is a oil tube that runs from a cam bearing in the block to the rockers in the head. Does anyone know how to remove the oil tube with out ruining it. I hate to ruin something only to have to cobble it later.
Thanks, Tony |
11-14-2016, 09:17 PM | #2 |
Member
Join Date: May 2010
Posts: 56
|
Re: 1953 Truck 6 Cylinder
That tube has a captive rubber square ring on the bottom. Twisting it back and forth while pulling upward usually does the trick.
|
Sponsored Links (Register now to hide all advertisements) |
|
11-15-2016, 10:06 AM | #3 |
Junior Member
Join Date: Jan 2012
Location: Michigan
Posts: 12
|
Re: 1953 Truck 6 Cylinder
Thank you MMB for your reply, is there a trick to getting it back in later?
|
11-15-2016, 05:34 PM | #4 |
Junior Member
Join Date: Jan 2012
Location: Michigan
Posts: 12
|
Re: 1953 Truck 6 Cylinder
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|