Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 03-08-2018, 11:22 AM   #1
Gold Digger
Senior Member
 
Join Date: Nov 2011
Location: Arkansas & Alaska
Posts: 645
Default Something to remember

I have 5 model A's and one that gave me troubles till I came up with a plan. This one always had fine metal particles in the gas tank or another words rust that some how got through the finger filter in the shout off valve and made it's way to the carb and caused more trouble there. After stopping and blowing back through the gas line every 100 miles I found a real strong magnet about an inch square and drilled and tapped it for a real small "I" bolt. With the "I" bolt I can hook it in and out of the tank and clean the rust off and put it back. This has worked 3 years for me with out cleaning but one time. It was completely covered with rust but had not given trouble at that point. It's been 2 years since I cleaned last and I better have another look.
Gold Digger is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 12:40 AM.