The Ford Barn

Nickster · 07-21-2012, 10:18 PM

Looking for a lift gate swing arm bracket for a 1946 Ford woodie. Need only one. This is the bracket that attaches to the rear corner pillar. Thanx

39wdy · 07-22-2012, 10:25 AM

Hi, Bob drake has all of those parts in reproduction now; swing arms $65 a pair, lift gate swing arm bracket assemblies $82 (the part that goes on the window frame), and the bracket assembly that has the chrome knob to lock the rear lift gate window in the open position $80 (P. 541 catalog 27). I have these parts as well, they are original but you should know if you want the bracket with the chrome knob that mounts on the rear corner pillar there are two types. The more common one is 2 inches long from the mounting base with the three screw holes to the end of the threads where the knob mounts. The other type is 2 and 5/8 inches long (measuring the same way) and has a sort of double bend in the cast shaft. You can e-mail me at [email protected] if I can help. Thanks, Toby Lampert

Nickster · 07-30-2012, 05:12 PM

Sponsored Links (Register now to hide all advertisements)

Don't need it.

07-21-2012, 10:18 PM	#1
Nickster Junior Member Join Date: Jul 2012 Location: Paso Robles, California Posts: 12	Woodie Part City: Paso Robles State: California Looking for a lift gate swing arm bracket for a 1946 Ford woodie. Need only one. This is the bracket that attaches to the rear corner pillar. Thanx

07-22-2012, 10:25 AM	#2
39wdy Senior Member Join Date: Jun 2011 Location: Vermont Posts: 226	Re: Woodie Part Hi, Bob drake has all of those parts in reproduction now; swing arms $65 a pair, lift gate swing arm bracket assemblies $82 (the part that goes on the window frame), and the bracket assembly that has the chrome knob to lock the rear lift gate window in the open position $80 (P. 541 catalog 27). I have these parts as well, they are original but you should know if you want the bracket with the chrome knob that mounts on the rear corner pillar there are two types. The more common one is 2 inches long from the mounting base with the three screw holes to the end of the threads where the knob mounts. The other type is 2 and 5/8 inches long (measuring the same way) and has a sort of double bend in the cast shaft. You can e-mail me at [email protected] if I can help. Thanks, Toby Lampert

07-30-2012, 05:12 PM	#3
Nickster Junior Member Join Date: Jul 2012 Location: Paso Robles, California Posts: 12	Re: Woodie Part Sponsored Links (Register now to hide all advertisements) Don't need it.