The Ford Barn

Tbud · 01-30-2015, 08:33 PM

I have a 1927 Touring which is a driving restoration project. I am in need of a front left and right top iron, anybody have a pair of good ones cheap. I live in Ontario Canada. Thanks, Bud.

jtbender · 03-22-2015, 10:46 AM

I have a complete top iron set, original, untouched, no rust, two broken bows. Affordable but not Cheap.
Jim

Tbud · 03-22-2015, 06:40 PM

Thanks for your reply Jim, can I ask what the price might be, I am sitting down. Bud

jtbender · 03-30-2015, 07:17 PM

Tbud,
I just got back on the site and found your reply. Sorry for the delay. At present I do not have a price. I am trying to source a few parts from which to build my custom top without cutting up the complete original top that came with the car. Do much will depend on what it will cost to source part of the iron over the windshield and the rear most irons.
The top if have has no rust. It folds (a little stiff) nicely. Two wooden bows are broken and will need replaced. You will also need one windshield clamp. Otherwise, a good bead blasting and powder coating and you should be good a new.
Do you have any top parts or are you completely void of a top?
Also I am in Troy, MI. I believe you are in Ontario? Not far.
Jim
[email protected]
248.647.1989

Tbud · 04-03-2015, 10:28 PM

Sponsored Links (Register now to hide all advertisements)

Hello JT, I have a complete set of irons but my front right is in bad shape and is the only one that needs to be replaced .

01-30-2015, 08:33 PM	#1
Tbud Junior Member Join Date: Jan 2015 Location: Ontario Posts: 8	Top irons I have a 1927 Touring which is a driving restoration project. I am in need of a front left and right top iron, anybody have a pair of good ones cheap. I live in Ontario Canada. Thanks, Bud.

03-22-2015, 10:46 AM	#2
jtbender Junior Member Join Date: Jun 2010 Location: Motor City Posts: 9	Re: Top irons I have a complete top iron set, original, untouched, no rust, two broken bows. Affordable but not Cheap. Jim

03-22-2015, 06:40 PM	#3
Tbud Junior Member Join Date: Jan 2015 Location: Ontario Posts: 8	Re: Top irons Thanks for your reply Jim, can I ask what the price might be, I am sitting down. Bud

03-30-2015, 07:17 PM	#4
jtbender Junior Member Join Date: Jun 2010 Location: Motor City Posts: 9	Re: Top irons Tbud, I just got back on the site and found your reply. Sorry for the delay. At present I do not have a price. I am trying to source a few parts from which to build my custom top without cutting up the complete original top that came with the car. Do much will depend on what it will cost to source part of the iron over the windshield and the rear most irons. The top if have has no rust. It folds (a little stiff) nicely. Two wooden bows are broken and will need replaced. You will also need one windshield clamp. Otherwise, a good bead blasting and powder coating and you should be good a new. Do you have any top parts or are you completely void of a top? Also I am in Troy, MI. I believe you are in Ontario? Not far. Jim [email protected] 248.647.1989

04-03-2015, 10:28 PM	#5
Tbud Junior Member Join Date: Jan 2015 Location: Ontario Posts: 8	Re: Top irons Sponsored Links (Register now to hide all advertisements) Hello JT, I have a complete set of irons but my front right is in bad shape and is the only one that needs to be replaced .