The Ford Barn

Brentwood Bob · 03-16-2021, 01:02 PM

Finally completed the 4part series on rebuilding the model a shift tower. In part 4 I use a bolt-on jig similiar to the available jigs you can get thru the parts houses. I made several improvements similiar to what Tom Endy added.
https://m.youtube.com/watch?v=BCIpZuxoLpQ

George, Iowa · 03-16-2021, 04:03 PM

You improved Tom Endy's ideas? I didn't know that could be done. Tom is kind of my Model A idol. I will have to watch your series. Thanks for taking the time to make a video! The videos on youtube really take the guess work out of a job.

Brentwood Bob · 03-16-2021, 04:22 PM

Thanks, some trial and error was involved.

Brentwood Bob · 01-09-2023, 04:46 PM

Sponsored Links (Register now to hide all advertisements)

Probably not an improvement on Tom Endy's methods, but learned a lot.

03-16-2021, 01:02 PM	#1
Brentwood Bob Senior Member Join Date: May 2010 Location: brentwood, ca Posts: 4,233	Rebuilding the transmission shift tower YouTube series Finally completed the 4part series on rebuilding the model a shift tower. In part 4 I use a bolt-on jig similiar to the available jigs you can get thru the parts houses. I made several improvements similiar to what Tom Endy added. https://m.youtube.com/watch?v=BCIpZuxoLpQ

03-16-2021, 04:03 PM	#2
George, Iowa Senior Member Join Date: May 2010 Location: Ames, Iowa Posts: 133	Re: Rebuilding the transmission shift tower YouTube series You improved Tom Endy's ideas? I didn't know that could be done. Tom is kind of my Model A idol. I will have to watch your series. Thanks for taking the time to make a video! The videos on youtube really take the guess work out of a job. __________________ Some is not a number... Soon is not a time... and hope is not a plan.

03-16-2021, 04:22 PM	#3
Brentwood Bob Senior Member Join Date: May 2010 Location: brentwood, ca Posts: 4,233	Re: Rebuilding the transmission shift tower YouTube series Thanks, some trial and error was involved.

01-09-2023, 04:46 PM	#4
Brentwood Bob Senior Member Join Date: May 2010 Location: brentwood, ca Posts: 4,233	Re: Rebuilding the transmission shift tower YouTube series Sponsored Links (Register now to hide all advertisements) Probably not an improvement on Tom Endy's methods, but learned a lot.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode