The Ford Barn

36tudordeluxe · 04-24-2015, 06:21 PM

Anybody using a MIGHTY WIPER in their '36, would like to get some opinions?

Krylon32 · 04-24-2015, 07:44 PM

Have you check with Newport Engineering? They make a fine product and stand behind what they produce.

36tudordeluxe · 04-25-2015, 12:28 AM

Quote:

Originally Posted by Krylon32

Have you check with Newport Engineering? They make a fine product and stand behind what they produce.

Thanks Krylon, went to their site but couldn't get a picture of the complete assembly with wiper blades. This looks like the top of the line in windshield wipers for a vintage Ford. Do you know if you can run just a single blade, am nervous about drilling hole in the roof for second blade.

Tom Morookian · 04-25-2015, 04:28 AM

I have a Mighty Wiper in my 36 coupe. Works great. One speed only. Only designed for one blade. Fits well behind the header panel.

41PICUP · 04-25-2015, 09:38 AM

Tom, question for you. With the Mighty Wiper is the problem of wiper wanting fly up on top eliminated while on the freeway? My stock type new Bob Drakes repos always want to up and over. Are you using one or two.

gmc1941 · 04-26-2015, 11:11 AM

Sponsored Links (Register now to hide all advertisements)

I used an MGB dual wiper system and had a two speed. Cost is is low and you wind up one or two wipers that make a strong contact on the glass. 12 volt only.

40cpe · 04-26-2015, 02:25 PM

Here is the installation of the mighty wiper in a '37 from the Flathead V8 techno fourm
http://www.flatheadv8.org/wiper.htm

Tom Morookian · 04-29-2015, 06:35 AM

Yup, it does "fly up" around 60 mph. I just put one of those picture hanger self sticking hooks on the windshield up wher the blade "parks". It's the kind with a pull tab to remove it.
It's been on there for over a year.

G.M. · 04-29-2015, 08:47 AM

The best wipers are non. Rainx works better than the small area the short wipers clean. G.M.

Krylon32 · 04-29-2015, 10:10 AM

I've had Bob at Newport build me a single side wiper for my deuce 3 window and PU. Yes they are the top of the line. Often copied, never duplicated!

keith oh · 04-29-2015, 11:38 AM

What to do about the two holes for vacuum original wiper controls in the headers of 35-36s.

V8COOPMAN · 04-29-2015, 11:51 AM

I realize you asked about the Mighty Wiper, but below is a link to a comprehensive thread by HEARD about the NEWPORT dual wiper assembly he put in his '36 3-window. Sure does look like a good, well-thought-out unit, and Heard sounds like he's very happy with it. Click the link! DD

https://www.fordbarn.com/forum/showthread.php?t=148226

04-24-2015, 06:21 PM	#1
36tudordeluxe Senior Member Join Date: Feb 2012 Location: Las Vegas, NV Posts: 1,260	MIGHTY WIPER for a '36 tudor? Anybody using a MIGHTY WIPER in their '36, would like to get some opinions?

04-24-2015, 07:44 PM	#2
Krylon32 Senior Member Join Date: May 2010 Posts: 4,470	Re: MIGHTY WIPER for a '36 tudor? Have you check with Newport Engineering? They make a fine product and stand behind what they produce.

04-25-2015, 04:28 AM	#4
Tom Morookian Senior Member Join Date: May 2010 Location: N. Ft. Myers, Fl. Posts: 502	Re: MIGHTY WIPER for a '36 tudor? I have a Mighty Wiper in my 36 coupe. Works great. One speed only. Only designed for one blade. Fits well behind the header panel.

04-25-2015, 09:38 AM	#5
41PICUP Senior Member Join Date: May 2010 Location: El Cerrito CA Posts: 338	Re: MIGHTY WIPER for a '36 tudor? Tom, question for you. With the Mighty Wiper is the problem of wiper wanting fly up on top eliminated while on the freeway? My stock type new Bob Drakes repos always want to up and over. Are you using one or two.

04-26-2015, 11:11 AM	#6
gmc1941 Senior Member Join Date: Jun 2010 Location: Palatine, Il Posts: 486	Re: MIGHTY WIPER for a '36 tudor? Sponsored Links (Register now to hide all advertisements) I used an MGB dual wiper system and had a two speed. Cost is is low and you wind up one or two wipers that make a strong contact on the glass. 12 volt only. __________________ 1939 Fordor Deluxe 1939 Ford Coupe Std 1940 Ford pickup Nothing in life is to be feared; it is only to be understood.

04-26-2015, 02:25 PM	#7
40cpe Senior Member Join Date: May 2010 Location: Star, MS Posts: 4,024	Re: MIGHTY WIPER for a '36 tudor? Here is the installation of the mighty wiper in a '37 from the Flathead V8 techno fourm http://www.flatheadv8.org/wiper.htm

04-29-2015, 06:35 AM	#8
Tom Morookian Senior Member Join Date: May 2010 Location: N. Ft. Myers, Fl. Posts: 502	Re: MIGHTY WIPER for a '36 tudor? Yup, it does "fly up" around 60 mph. I just put one of those picture hanger self sticking hooks on the windshield up wher the blade "parks". It's the kind with a pull tab to remove it. It's been on there for over a year.

04-29-2015, 08:47 AM	#9
G.M. Senior Member Join Date: May 2010 Location: Florida and Penna. Posts: 4,471	Re: MIGHTY WIPER for a '36 tudor? The best wipers are non. Rainx works better than the small area the short wipers clean. G.M. __________________ www.fordcollector.com

04-29-2015, 10:10 AM	#10
Krylon32 Senior Member Join Date: May 2010 Posts: 4,470	Re: MIGHTY WIPER for a '36 tudor? I've had Bob at Newport build me a single side wiper for my deuce 3 window and PU. Yes they are the top of the line. Often copied, never duplicated!

04-29-2015, 11:38 AM	#11
keith oh Senior Member Join Date: May 2010 Location: Millersport, central ohio Posts: 668	Re: MIGHTY WIPER for a '36 tudor? What to do about the two holes for vacuum original wiper controls in the headers of 35-36s.

04-29-2015, 11:51 AM	#12
V8COOPMAN Senior Member Join Date: May 2010 Location: East Shore of LAKE HOUSTON Posts: 11,106	Re: MIGHTY WIPER for a '36 tudor? I realize you asked about the Mighty Wiper, but below is a link to a comprehensive thread by HEARD about the NEWPORT dual wiper assembly he put in his '36 3-window. Sure does look like a good, well-thought-out unit, and Heard sounds like he's very happy with it. Click the link! DD https://www.fordbarn.com/forum/showthread.php?t=148226 __________________ *Click Links Below* __ ▼ *'35-'36 W/8BA & MECHANICAL FAN* *T5 W/TORQUE TUBE*