Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 10-24-2020, 06:53 PM   #1
richard crow
Senior Member
 
Join Date: May 2010
Posts: 1,763
Default spindles

what is the differance between 37-41 41-48 spindles can 41-48 be used on a model a axle to mount hydl brakes
richard crow is offline   Reply With Quote
Old 10-24-2020, 07:11 PM   #2
rich b
Senior Member
 
rich b's Avatar
 
Join Date: May 2010
Location: Minnesota
Posts: 1,813
Default Re: spindles

Later model spindles have larger (taller) bushings along with a different appearance. They will fit a Model A axle.
rich b is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 10-24-2020, 09:11 PM   #3
Fordors
Senior Member
 
Join Date: May 2010
Location: Orland Park,IL
Posts: 1,400
Default Re: spindles

As rich b said, yes they can be used on a Model A axle, but be advised that the ‘37-‘41’s (also known as round backs) use a king pin 5 1/2” long and the ‘42-‘48 spindles (square back) take a 6” long k/p. You will want the correct k/p set for the spindles you choose.
__________________
My school colors are black and blue, I attended the School of Hard Knocks where I received a Masters Degree in Chronic Mopery.
Fordors is offline   Reply With Quote
Old 10-25-2020, 12:06 AM   #4
Randy in ca
Senior Member
 
Randy in ca's Avatar
 
Join Date: May 2010
Posts: 1,628
Default Re: spindles

Here's a picture I've posted a couple of times before that shows the differences that others have mentioned. Basically the 1942-48 version are beefier than the 1937-41 but otherwise interchangeable.


-
Attached Images
File Type: jpg 1937-41 Ford spindles vs 1942-48.jpg (64.9 KB, 126 views)
Randy in ca is offline   Reply With Quote
Old 10-25-2020, 04:39 PM   #5
richard crow
Senior Member
 
Join Date: May 2010
Posts: 1,763
Default Re: spindles

all that answered thanks for the great info
richard crow is offline   Reply With Quote
Old 10-25-2020, 05:23 PM   #6
Mart
Senior Member
 
Mart's Avatar
 
Join Date: May 2010
Location: Solihull, England.
Posts: 8,732
Default Re: spindles

Sponsored Links (Register now to hide all advertisements)
The later one have a generally square appearance, the 37-41 are commonly called roundback.
Would it be correct to assume the later ones wear more slowly due to the longer bushes? (Everything else being equal). Probably made longer to compensate for the vehicles getting heavier???
Mart is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 07:23 AM.