Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 05-15-2018, 04:37 PM   #10
Neil Wilson
Senior Member
Neil Wilson's Avatar
Join Date: May 2010
Location: Boulder, CO
Posts: 505
Default Re: '29 CCPU seat shopping - what do I need?

Originally Posted by Papa's CCPU View Post
Neil, I have contacted you in the past regarding my 82-A cab....I am now getting things going and this thread thankfully stopped me in my tracks before ordering seat cover materials.....
Would you consider as Tom mentioned in post #12 that Classtique makes a closer to original set of covers????

Have contacted them but they have no images available showing there finished product... Any help appreciated Thanks, Mike

The covers need to have a cord sewn around the bottom of the skirts so that they can be crimped into the channel around the lower edge of the springs. This is the way Ford did the installation. I used a local shop to make the covers and installed them my self. The result was not great for this first attempt.

Attached is a photo showing an installed cover. I will send your the photo folder if you email neil@aafords.com.

Vendors simply install the covers by wrapping them under the spring and use hog rings to hold them in place.

With a corded cover, the skirt must be the correct length to allow the spring to be compressed while the cord is crimped into the channel.
Attached Images
File Type: jpg xIMG_5563.jpg (26.6 KB, 30 views)
neil@aafords.com - email contact

https://aafords.com Ford Model AA Truck Club @ aafords.com
Neil Wilson is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)

All times are GMT -5. The time now is 11:33 PM.