|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
11-14-2020, 05:59 PM | #1 |
Senior Member
Join Date: May 2010
Location: Belleville,MI
Posts: 1,427
|
Hub cap identification
Hi Folks,
I came across this very cool old “Ford” hub cap. It measures 11 1/2” across and has the same mounting style as the 40-48 passenger 16” wheels. I’m not sure what it fits or how rare it is. I’ll post pics soon as I get to my PC.
__________________
Thank God this is only a hobby! |
11-14-2020, 06:01 PM | #2 |
Senior Member
Join Date: May 2015
Posts: 8,143
|
Re: Hub cap identification
__________________
The only thing nice about being imperfect is the joy it brings to others.... "Silver rings, your butt! Them's washers!" "We shot our way out of that town for a dollar's worth of steel holes!" - from 'The Wild Bunch' - 1969 https://www.youtube.com/watch?v=7NReUd2_0u0 |
Sponsored Links (Register now to hide all advertisements) |
|
11-14-2020, 06:47 PM | #3 |
Senior Member
Join Date: May 2010
Location: Napa,California
Posts: 6,037
|
Re: Hub cap identification
I believe those caps are for the big pickups.
|
11-14-2020, 06:49 PM | #4 |
Senior Member
Join Date: May 2010
Location: Wisconsin, USA
Posts: 9,007
|
Re: Hub cap identification
one ton...
__________________
"I can explain it for you. However, I can't understand it for you". |
11-14-2020, 07:12 PM | #5 |
Senior Member
Join Date: May 2010
Location: Belleville,MI
Posts: 1,427
|
Re: Hub cap identification
Good to know, thanks guys. I’ve never seen one of these hub caps before.
__________________
Thank God this is only a hobby! Last edited by funrunr; 11-17-2020 at 06:22 AM. |
11-14-2020, 08:13 PM | #6 |
Senior Member
Join Date: May 2010
Location: Up North
Posts: 626
|
Re: Hub cap identification
Sponsored Links (Register now to hide all advertisements)
Check out Ford Trucks Since 1905 by James Wagner |
11-14-2020, 11:30 PM | #7 |
Senior Member
Join Date: May 2010
Posts: 2,484
|
Re: Hub cap identification
Locally two fellows have Dearborned those 'tonners' and spent big $$$ for the hubcaps and the repairs to originals. Newc
|
11-15-2020, 09:54 AM | #8 |
Senior Member
Join Date: May 2010
Location: Liberty, KY
Posts: 901
|
Re: Hub cap identification
41-47 tonner. the 38-40 was the same except had a V8 instead of Ford script.
|
11-15-2020, 01:23 PM | #9 |
Senior Member
Join Date: Jan 2014
Location: Orcas Island Washington
Posts: 4,933
|
Re: Hub cap identification
The V8 script was changed to FORD when the six cyl option came along. Maybe 1941? That's a nice cap.
__________________
Owner/Operator of 'Jailbar Ranch' on the side of Mt. Pickett. Current stable consists of 1946 1/2 ton pickup turned woodie wagon with FH V8, 1947 Tonner Pickup (red) mostly stock with exception of a cummins 6at turbo diesel, 1946 Tonner Pickup (green) with 226 cu in 6 cyl flathead, 1979 Toyota landcruiser wagon, completely encased in 1947 Ford Jailbar sheet metal. Ok, cornbinder rear fenders..... 'Rusty ol' floorboards, hot on their feet' (Alan Jackson) |
11-16-2020, 06:03 AM | #10 |
Senior Member
Join Date: May 2012
Location: Queensland, Australia
Posts: 10,370
|
Re: Hub cap identification
Here is a picture of a 1942 Ford Tonner with Express Body that is illustrated in the original 1942 Ford Sales Brochure. You will notice that it is wearing the same Hubcaps that funrunr was enquiring about. Hope that this helps. |
11-16-2020, 06:07 AM | #11 |
Senior Member
Join Date: May 2012
Location: Queensland, Australia
Posts: 10,370
|
Re: Hub cap identification
Just for a comparison, here is a picture of the 1938 Ford 122-Inch Express. You will notice that it is wearing the same profile Hubcaps, however, instead of the word Ford that is on the later models, this one has the stylised V8 stamped in it. This picture is from the original 1938 Ford Sales Brochure. |
11-16-2020, 06:11 AM | #12 |
Senior Member
Join Date: May 2012
Location: Queensland, Australia
Posts: 10,370
|
Re: Hub cap identification
Similarly, here is a picture of the 1939 Ford One Tonner. Notice that Ford has given this model a new name - One Tonner. You will also notice that it is wearing the same larger Hubcaps with the V8 on them, identical to the ones on the 1938 model in my previous Post. This is another illustration from the original 1939 Ford Sales Brochure. |
11-16-2020, 06:22 AM | #13 |
Senior Member
Join Date: May 2012
Location: Queensland, Australia
Posts: 10,370
|
Re: Hub cap identification
Here is a page from the 1941 Ford Commercial Sales Brochure for the 122 Inch Chassis. You will read that it was available in 3/4 Ton and One-Ton. It also says that these units were available in 85 HP V8 or 30 HP 4-Cylinder. That is why the description on the Hubcap was changed from V8 to Ford. I hope that you have learned something about the light trucks offered by Ford during these years. Last edited by mercman from oz; 11-16-2020 at 06:29 AM. Reason: Wrong Year listed originally. |
11-16-2020, 09:45 AM | #14 |
Senior Member
Join Date: May 2010
Location: Belleville,MI
Posts: 1,427
|
Re: Hub cap identification
As always I appreciate each and everyone of you for taking the time to share your knowledge.
__________________
Thank God this is only a hobby! |
11-16-2020, 07:37 PM | #15 |
Senior Member
Join Date: May 2012
Location: Queensland, Australia
Posts: 10,370
|
Re: Hub cap identification
1940 Ford 122 Inch Truck. Illustration from the Australian Sales Brochure. Notice that the Hubcap still shows the V8 emblem. It seems that 1940 was the last year that these Hubcaps that used on the Ford 122 Inch models showed the V8 emblem? For 1941, they read FORD because buyers could chose the optional 4 cylinder engine. |
11-16-2020, 08:20 PM | #16 |
Senior Member
Join Date: Jan 2014
Location: Orcas Island Washington
Posts: 4,933
|
Re: Hub cap identification
It's all I can do to keep from drawing a woodie body on that upper left hand image... The closed front end version. I have owned and loved the 122" tonners each side of that but never a 40-41 tonner. If I live long enough I hope to own a 40-41 tonner express. And I see the 'ute' influence on that express. Looks kinda like a unibody from the early sixties here in the states.
__________________
Owner/Operator of 'Jailbar Ranch' on the side of Mt. Pickett. Current stable consists of 1946 1/2 ton pickup turned woodie wagon with FH V8, 1947 Tonner Pickup (red) mostly stock with exception of a cummins 6at turbo diesel, 1946 Tonner Pickup (green) with 226 cu in 6 cyl flathead, 1979 Toyota landcruiser wagon, completely encased in 1947 Ford Jailbar sheet metal. Ok, cornbinder rear fenders..... 'Rusty ol' floorboards, hot on their feet' (Alan Jackson) Last edited by GB SISSON; 11-16-2020 at 08:25 PM. |
11-16-2020, 10:10 PM | #17 |
Senior Member
Join Date: May 2012
Location: Queensland, Australia
Posts: 10,370
|
Re: Hub cap identification
For the benefit of GB SISSON, I am adding these pictures of an Australian 1940 Ford 122 Inch Open-Cab Pick-Up that I used to see frequently rusting away in a local back yard around 40 year ago. Originally, this vehicle would have worn the same style Hubcaps that started off this Thread. It was still wearing it's original Queensland License Plate. Back then, the only plate issued in Queensland was the one fitted to the rear. That all changed in 1955, when we got a new series of Plates that were required to be fitted to the front and rear. I have not seen or heard of it since, so I don't know if it still exists? I am not sure if it was the 01D Series 15-18 CWT model, or the 01Y Series 1 Ton and 25-30 CWT version. You will see that the rear body portion is not joined to the front part. I hope you enjoy looking at these pictures of a vehicle that I believe was unique to Australia? |
11-16-2020, 11:09 PM | #18 | |
Senior Member
Join Date: Jan 2014
Location: Orcas Island Washington
Posts: 4,933
|
Re: Hub cap identification
Quote:
Enjoy is just too small of a word. If you run across it again, I have a good rear axle just sitting here waiting for it. As my kids would say at a time like this "Dude, you are killin' me"
__________________
Owner/Operator of 'Jailbar Ranch' on the side of Mt. Pickett. Current stable consists of 1946 1/2 ton pickup turned woodie wagon with FH V8, 1947 Tonner Pickup (red) mostly stock with exception of a cummins 6at turbo diesel, 1946 Tonner Pickup (green) with 226 cu in 6 cyl flathead, 1979 Toyota landcruiser wagon, completely encased in 1947 Ford Jailbar sheet metal. Ok, cornbinder rear fenders..... 'Rusty ol' floorboards, hot on their feet' (Alan Jackson) |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|