Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 12-06-2019, 12:31 PM   #1
TomT/Williamsburg
Senior Member
 
TomT/Williamsburg's Avatar
 
Join Date: May 2010
Location: Williamsburg, Virginia
Posts: 2,646
Default 40-41 Pickup Inner Fender Panels

Do the truck inner fender panels bolt up in the same holes as say a 37 car frame?

Just mocking things up on my project .....

Thanks for any help you can give .....
TomT/Williamsburg is offline   Reply With Quote
Old 12-06-2019, 12:52 PM   #2
Mart
Senior Member
 
Mart's Avatar
 
Join Date: May 2010
Location: Solihull, England.
Posts: 8,733
Default Re: 40-41 Pickup Inner Fender Panels

Do you have the big V shaped support? That is what the whole front clip rides on. The lower edges of the inner fenders only bolt on at one (or is it two) points. Nothing at the forward end, other than the attachment to the V shaped brace.
Mart is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 12-06-2019, 01:03 PM   #3
TomT/Williamsburg
Senior Member
 
TomT/Williamsburg's Avatar
 
Join Date: May 2010
Location: Williamsburg, Virginia
Posts: 2,646
Default Re: 40-41 Pickup Inner Fender Panels

Well, there are two holes around the brake line opening and one in the back towards the cab .....

This is not a stock build - no “V” shaped support .....
TomT/Williamsburg is offline   Reply With Quote
Old 12-06-2019, 01:41 PM   #4
V8COOPMAN
Senior Member
 
V8COOPMAN's Avatar
 
Join Date: May 2010
Location: East Shore of LAKE HOUSTON
Posts: 11,106
Default Re: 40-41 Pickup Inner Fender Panels

Tom....In this pic you'll note the angle iron fender-support bracket(s) that Jim Pullen (19Fordy) made to preclude the use of the "V" support fixture on his slick, black coupe. DD


__________________
Click Links Below __


'35-'36 W/8BA & MECHANICAL FAN


T5 W/TORQUE TUBE
V8COOPMAN is offline   Reply With Quote
Old 12-06-2019, 02:00 PM   #5
TomT/Williamsburg
Senior Member
 
TomT/Williamsburg's Avatar
 
Join Date: May 2010
Location: Williamsburg, Virginia
Posts: 2,646
Default Re: 40-41 Pickup Inner Fender Panels

Thank you V8Coopman ......
TomT/Williamsburg is offline   Reply With Quote
Old 12-06-2019, 02:07 PM   #6
TomT/Williamsburg
Senior Member
 
TomT/Williamsburg's Avatar
 
Join Date: May 2010
Location: Williamsburg, Virginia
Posts: 2,646
Default Re: 40-41 Pickup Inner Fender Panels

Sponsored Links (Register now to hide all advertisements)
Ok - I think I have my question(s) answered.

Thank you all for your responses and to HamtiwnAl and 41fordpickup .....

When I sold my coupe I lost my reference vehicle and now that I am back on this pickup I am lost! Lol!
TomT/Williamsburg is offline   Reply With Quote
Old 12-06-2019, 04:40 PM   #7
TJ
Senior Member
 
TJ's Avatar
 
Join Date: May 2010
Location: Napa,California
Posts: 6,007
Default Re: 40-41 Pickup Inner Fender Panels

The two holes near the brake line use the rubber bumpers. The far back hole uses a 5/16 bolt
TJ is offline   Reply With Quote
Old 12-06-2019, 09:58 PM   #8
TomT/Williamsburg
Senior Member
 
TomT/Williamsburg's Avatar
 
Join Date: May 2010
Location: Williamsburg, Virginia
Posts: 2,646
Default Re: 40-41 Pickup Inner Fender Panels

Thanks, TJ ......
TomT/Williamsburg is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 05:51 AM.