The Ford Barn

frenchy dehoux · 08-09-2010, 02:08 PM

I am looking if someone knows of anyone making or selling for a V8 Ford Flathed the the main brace that is bolted on the exhaust side of the block to hold the engine on the stand. I have one for the V12 engines but I can not use this one for the V8 as the exhaust port are further away. Please let me know.

Thanks !
Frenchy

36tbird · 08-09-2010, 04:28 PM

did you look on the 'bay?

Elmo Rodge · 08-09-2010, 05:10 PM

Call Jim at Antique Ford in Rosemead, California. 626 288 2121 Let it ring. Sometimes it takes him a while to answer. Wayno

JM 35 Sedan · 08-09-2010, 05:26 PM

Check with this guy http://www.stumpysfabworks.zoomshare.com/
Good well made pruducts at good prices. JM

frenchy dehoux · 08-09-2010, 05:56 PM

Thanks for the heads up.

Frenchy

coilover · 08-10-2010, 12:15 AM

Sponsored Links (Register now to hide all advertisements)

I made one that holds the engine in the north-south direction instead of cross wise like the exhaust mount one. Made the spacers between the mount plate and bell housing holes long enough to allow flywheel/clutch work but most important is the additional brace from the top of the mount plate to the rear four intake bolt holes. My stand is a four wheel heavy duty one so I don't know if a Harbor Freight one could take it but my head plate is welded to a 3/4 ton spindle and turns in bearings so it's not a problem.

08-09-2010, 02:08 PM	#1
frenchy dehoux Senior Member Join Date: Jul 2010 Location: Queen Creek AZ Posts: 519	Ford Flat Head V8 engine block brace I am looking if someone knows of anyone making or selling for a V8 Ford Flathed the the main brace that is bolted on the exhaust side of the block to hold the engine on the stand. I have one for the V12 engines but I can not use this one for the V8 as the exhaust port are further away. Please let me know. Thanks ! Frenchy

08-09-2010, 04:28 PM	#2
36tbird Senior Member Join Date: May 2010 Location: nw SanAntonio, TX Posts: 939	Re: Ford Flat Head V8 engine block brace did you look on the 'bay?

08-09-2010, 05:10 PM	#3
Elmo Rodge Senior Member Join Date: May 2010 Location: Salina, Utah Posts: 325	Re: Ford Flat Head V8 engine block brace Call Jim at Antique Ford in Rosemead, California. 626 288 2121 Let it ring. Sometimes it takes him a while to answer. Wayno __________________ Life is not a spectator sport.

08-09-2010, 05:26 PM	#4
JM 35 Sedan Senior Member Join Date: May 2010 Location: Near Rising Sun, Maryland Posts: 10,858	Re: Ford Flat Head V8 engine block brace Check with this guy http://www.stumpysfabworks.zoomshare.com/ Good well made pruducts at good prices. JM __________________ *John* *"Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein*

08-09-2010, 05:56 PM	#5
frenchy dehoux Senior Member Join Date: Jul 2010 Location: Queen Creek AZ Posts: 519	Re: Ford Flat Head V8 engine block brace Thanks for the heads up. Frenchy

08-10-2010, 12:15 AM	#6
coilover Member Join Date: May 2010 Posts: 33	Re: Ford Flat Head V8 engine block brace Sponsored Links (Register now to hide all advertisements) I made one that holds the engine in the north-south direction instead of cross wise like the exhaust mount one. Made the spacers between the mount plate and bell housing holes long enough to allow flywheel/clutch work but most important is the additional brace from the top of the mount plate to the rear four intake bolt holes. My stand is a four wheel heavy duty one so I don't know if a Harbor Freight one could take it but my head plate is welded to a 3/4 ton spindle and turns in bearings so it's not a problem.