Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 08-30-2020, 09:32 PM   #1
Senior Member
Join Date: Sep 2019
Location: Kountze,TX
Posts: 309
Default Borg-Warner OD Wiring

I installed a Borg-Warner OD in my Huckster. Now I am trying to figure out the wiring. There are quite a few different wiring diagrams out there and I am really confused. 6 volt Positive ground system. On the unit, I have 2 wires coming out of the OD Solenoid and there is 1 wire coming out of the OD Governor. I have an old Standard Blue Streak 3 post relay. 1 terminal marked "B" 1 marked "L" and 1 marked "S". My intent is to use an over-ride switch instead of a kickdown switch. I guess I could mount the kickdown switch on the dash instead. Can someone help me figure out how this all ties together?

Last edited by DBSHELTON; 08-31-2020 at 06:11 AM.
DBSHELTON is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)

All times are GMT -5. The time now is 12:29 PM.