The Ford Barn

Patrick L. · 05-21-2019, 11:53 AM

The fingers can be adjusted thru the inspection cover. There is quite a bit of info on it.

pinball73 · 05-22-2019, 08:01 AM

Quote:

Originally Posted by Patrick L.

The fingers can be adjusted thru the inspection cover. There is quite a bit of info on it.

Thanks for the help! where can I find the information you are speaking of? would it be in the Ford service bulletin 1928/1931? if so I have it some place!

katy · 05-22-2019, 09:17 AM

Quote:

Thanks for the help! where can I find the information you are speaking of?

Try the search button at the top of this page.

Patrick L. · 05-22-2019, 11:34 AM

I just find the finger that contacts first. Mark them. Then I use a long .0015" feeler strip and set the rest to a stiff drag. Work the clutch pedal a few times and go over them again.

05-21-2019, 11:53 AM	#21
Patrick L. Senior Member Join Date: May 2010 Location: Largo Florida Posts: 7,225	Re: Clutch problems The fingers can be adjusted thru the inspection cover. There is quite a bit of info on it.

05-22-2019, 11:34 AM	#24
Patrick L. Senior Member Join Date: May 2010 Location: Largo Florida Posts: 7,225	Re: Clutch problems I just find the finger that contacts first. Mark them. Then I use a long .0015" feeler strip and set the rest to a stiff drag. Work the clutch pedal a few times and go over them again.