The Ford Barn

John R · 01-11-2013, 06:16 PM

Need a nice, unbent, unrusty “8BA” wide belt generator pulley exactly like the one in the photos. Specs: pulley OD = 3.125; Overall OD = 5.5”; 16 fins on the backside; wide belt.
Also need an “8BA” wide belt crankshaft pulley in similar condition. Thanks in advance, John
[email protected]

f1builder · 01-11-2013, 09:52 PM

are you looking for the dual wide belt crank pulley or the single?

HD · 01-12-2013, 02:13 PM

Sold

fordyford · 01-16-2013, 09:20 PM

Sponsored Links (Register now to hide all advertisements)

If you are still looking for a gen. pulley, I have a good one. It is used but not damaged. The # 8BA is stamped on the front, measures 3.125, 5.5 and 16 fins. $20.00 mailed to USA address.

Keith

01-11-2013, 09:52 PM	#2
f1builder Senior Member Join Date: Jan 2011 Posts: 554	Re: "8BA" Generator & Crank Pulleys are you looking for the dual wide belt crank pulley or the single?

01-12-2013, 02:13 PM	#3
HD Senior Member Join Date: May 2010 Posts: 970	Re: "8BA" Generator & Crank Pulleys Sold Last edited by HD; 05-23-2013 at 04:17 PM. Reason: SOLD

01-16-2013, 09:20 PM	#4
fordyford Senior Member Join Date: May 2010 Posts: 192	Re: "8BA" Generator & Crank Pulleys Sponsored Links (Register now to hide all advertisements) If you are still looking for a gen. pulley, I have a good one. It is used but not damaged. The # 8BA is stamped on the front, measures 3.125, 5.5 and 16 fins. $20.00 mailed to USA address. Keith