|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
12-30-2014, 03:56 PM | #1 |
Senior Member
Join Date: May 2010
Location: Tulsa Ok
Posts: 516
|
40 frame side mounts.
What is the common name for the body mounts that are rivited to the side of the frame? I have seen them called outriggers but I am sure that is not the correct name. I need to find a pair of the fronts and need to know what to call them.
|
12-30-2014, 06:06 PM | #2 |
Senior Member
Join Date: May 2010
Posts: 886
|
Re: 40 frame side mounts.
Okie dkie,
check your private mail. fordestes, |
Sponsored Links (Register now to hide all advertisements) |
|
12-30-2014, 11:28 PM | #3 |
Senior Member
Join Date: May 2010
Location: Tulsa Ok
Posts: 516
|
Re: 40 frame side mounts.
Drake calls then "body mounts" although they are not available yet.
|
12-31-2014, 01:37 AM | #4 |
Senior Member
Join Date: May 2010
Posts: 1,640
|
Re: 40 frame side mounts.
Wescott's calls them Outriggers. Personally haven't used them, but have used both their Rear Crossmember and the Cross Braces and found them to be of very good quality.
- - |
12-31-2014, 06:15 AM | #5 |
Senior Member
Join Date: May 2010
Posts: 4,743
|
Re: 40 frame side mounts.
Precision Coachworks made a very nice set of the Body Mounts. The owner of the shop passed away and the business has been sold. I do not have the name or contact of the new owner. Some of the replacements are welded in place and others bolt or rivet to the original locations for attachment.
|
12-31-2014, 10:20 AM | #6 |
Senior Member
Join Date: May 2010
Location: Napa,California
Posts: 6,029
|
Re: 40 frame side mounts.
Sponsored Links (Register now to hide all advertisements)
|
12-31-2014, 10:45 AM | #7 |
Senior Member
Join Date: May 2010
Location: Tulsa Ok
Posts: 516
|
Re: 40 frame side mounts.
I would prefer to bolt them in place rather than weld them. I hope to find some good originals, or may just have to wait for Drake to make them.
|
12-31-2014, 10:58 AM | #8 |
Senior Member
Join Date: May 2010
Posts: 4,469
|
Re: 40 frame side mounts.
I've used several sets of CE body mounts. Welded them on repro frames and bolted them on original rails. Never had a complaint.
|
12-31-2014, 10:59 AM | #9 |
Senior Member
Join Date: Dec 2014
Location: Columbus, IN
Posts: 1,406
|
Re: 40 frame side mounts.
Roy Nacewicz has outriggers on page 97 of the Early Ford V8 catalog at www.Fordbolts.com.
|
12-31-2014, 12:37 PM | #10 | |
Senior Member
Join Date: May 2010
Location: Tulsa Ok
Posts: 516
|
Re: 40 frame side mounts.
Quote:
Wow, I thought Drake was kinda high at $185 for the set of four. Of courser they don't have them yet. $400 for the set of four from Ray. |
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|