|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
11-11-2020, 01:54 PM | #1 |
Senior Member
Join Date: Feb 2016
Location: central minn
Posts: 1,025
|
Clearing the air for holley 94 part
Ok I was not trying to offend anyone on here I was trying to say what I thought about it
I know how things work I work at a few shops in my lifetime and not always get things done like they want Sometimes you get treated good and sometimes you don't I had no trouble with the shafts I got from speedway the only trouble I had is with there plates and screws This shaft I had problems with the linkage end was to big and the slots were to thin when I put the plates in the shaft would not turn even with no screws I know things happen but I just going to move on and try something else I didn't want to make people mad but if you did get mad nothing I can do about that |
11-11-2020, 02:59 PM | #2 |
Member Emeritus
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
|
Re: Clearing the air for holley 94 part
Now this is a strange post??
Even more interesting: "This is my last post about it I'm done no more comments from me" Last edited by JSeery; 11-11-2020 at 03:10 PM. |
Sponsored Links (Register now to hide all advertisements) |
|
11-11-2020, 03:46 PM | #3 |
Senior Member
Join Date: Feb 2016
Location: central minn
Posts: 1,025
|
Re: Clearing the air for holley 94 part
|
11-11-2020, 04:16 PM | #4 |
Senior Member
Join Date: Dec 2013
Location: Minnesota, Florida Keys
Posts: 10,316
|
Re: Clearing the air for holley 94 part
Good choice; now stick with it.
|
11-11-2020, 06:54 PM | #5 |
Senior Member
Join Date: May 2010
Location: Oshkosh, Wi
Posts: 4,526
|
Re: Clearing the air for holley 94 part
|
11-11-2020, 07:27 PM | #6 |
Senior Member
Join Date: Feb 2016
Location: central minn
Posts: 1,025
|
Re: Clearing the air for holley 94 part
|
11-11-2020, 07:33 PM | #7 |
Senior Member
Join Date: May 2010
Location: Wisconsin, USA
Posts: 9,007
|
Re: Clearing the air for holley 94 part
Strange indeed. And just what language is that?
__________________
"I can explain it for you. However, I can't understand it for you". |
11-11-2020, 08:13 PM | #8 |
Senior Member
Join Date: Feb 2016
Location: central minn
Posts: 1,025
|
Re: Clearing the air for holley 94 part
Keep been a smart a$$ then
|
11-12-2020, 02:32 AM | #9 |
Senior Member
Join Date: Jul 2011
Location: SF Bay Area
Posts: 6,645
|
Re: Clearing the air for holley 94 part
Did anyone think to melt butter for our popcorn?
__________________
Alan |
11-12-2020, 05:49 AM | #10 |
Senior Member
Join Date: Jan 2012
Location: Lyman,ME.
Posts: 2,629
|
Re: Clearing the air for holley 94 part
I really think this whole thing started from one or more misunderstandings......it’s a shame
.......Mark
__________________
I'm thinkin' about crankin' My ragged ol' truck up and haulin' myself into town. Billy Joe Shaver |
11-12-2020, 06:55 AM | #11 |
Senior Member
Join Date: May 2010
Location: Shippensburg, pa.
Posts: 416
|
Re: Clearing the air for holley 94 part
Why doesn't everyone shut up about this. It has become a pissing contest. I thought that this site was about early Fords, not about who / is / was right. Let's just move on.
|
11-12-2020, 08:24 AM | #12 |
Senior Member
Join Date: Jan 2016
Posts: 2,098
|
Re: Clearing the air for holley 94 part
HUh, what, ahhhh.
|
11-12-2020, 08:55 AM | #13 |
Senior Member
Join Date: Feb 2016
Location: central minn
Posts: 1,025
|
Re: Clearing the air for holley 94 part
|
11-12-2020, 08:56 AM | #14 |
Senior Member
Join Date: Feb 2016
Location: central minn
Posts: 1,025
|
Re: Clearing the air for holley 94 part
|
11-12-2020, 09:35 AM | #15 |
Senior Member
Join Date: May 2010
Location: new britain,ct 06052
Posts: 9,390
|
Re: Clearing the air for holley 94 part
I think this about a previous post made by 1931flathead about a 94. JMO
Paul in CT |
11-12-2020, 09:37 AM | #16 |
Senior Member
Join Date: Feb 2016
Location: central minn
Posts: 1,025
|
Re: Clearing the air for holley 94 part
Thanks Paul this is about it
|
11-13-2020, 02:20 PM | #17 |
Senior Member
Join Date: May 2017
Location: NY
Posts: 318
|
Re: Clearing the air for holley 94 part
I see that 1931 Flathead was banned.
I just wanted to share my thought about that. The guy was upset that he spent money, received parts and They just didn’t work for the guy. So he expressed what he felt and at first we all tried to help with different ideas of what to do. Some said send them back, some said you never had problems from this vender and that he stands by his product. Even the vender chimed in to try and correct the situation. After all that he just didn’t want to deal with the vendor anymore. He tried to let it go but message after messages just brought this guy back into the conversation. Instead of defusing the situation Some even edged the guy on. That just fueled the fire. Maybe the guy didn’t use his best judgement but either did some. After a while it was like a soap opera. I’m not trying to take anybody’s side but both sides could have let it go and that would have been the end of the story. So now we have a Ford Barner banned. This is not a good example how we should conduct ourselves. We need good people on this site and we are good people just sometimes we take to the next level.This site has helped me many times and I could not do without you guys but there were times where I could have been drawn into the drama But drama doesn’t belong on this site. We need to be more professional and yes a joke know and then is funny but remember It’s just a joke. Some people could take it wrong. When we write these messages on the Forum remembered people just see the writing they don’t hear how it’s expressed and the take it out of context. I’m not pointing fingers at anyone just Trying to make sense of it all. |
11-13-2020, 05:54 PM | #18 |
Senior Member
Join Date: May 2010
Location: Mn
Posts: 2,411
|
Re: Clearing the air for holley 94 part
===============================================
Maybe this old Thread will shed a little light on this man's past brain problems he's endured... There are 85 posts in the link below, but Here are some key post #'s to read : #2, #19, #28, #47, #50, #80 https://www.fordbarn.com/forum/showt...=brain+surgery .
__________________
If mama ain't happy, ain't nobody happy. But if daddy ain't happy...RUN Last edited by Lanny; 11-13-2020 at 06:02 PM. |
11-13-2020, 06:42 PM | #19 |
Senior Member
Join Date: May 2017
Location: NY
Posts: 318
|
Re: Clearing the air for holley 94 part
Lanny I felt sorry for the guy and I didn’t know that he may have health problems.
I don’t like bullies. If the guy has a health problem that’s more to let it go. Now I don’t know if anybody else knows that but you should still be nice to people And drop the subject knowing its not going anywhere. Already I received a private message from one of the bullies. I won’t say who it was but I’m sure he will make himself present. He’s a stirrer and has to have the last word. Let’s see if I’m right. |
11-13-2020, 06:48 PM | #20 |
BANNED
Join Date: Jun 2010
Location: Utica, Ohio
Posts: 522
|
Re: Clearing the air for holley 94 part
Lanny and Blast,
Thank ya'll for those posts. I didn't Like what was happening either. Hope he gets unbanned. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|