The Ford Barn

CA Victoria · 04-24-2014, 12:28 AM

For someone with an original drawing:

What the measurement from the cam center to the pan rail on an A Block?

What is diameter of the crank bore before Babbitt?

colin1928 · 04-24-2014, 04:26 AM

Camshaft centre from rail is 2.875-2.878
If I remember correct Main bore is 1.6875 (1. 11/16) ??
Cam to Crank centre line is 4.155
Colin

CA Victoria · 04-24-2014, 07:39 AM

Thanks Colin.
T.

Bob C · 04-24-2014, 10:57 AM

Sponsored Links (Register now to hide all advertisements)

Vince shows the same as Colin http://www.fordgarage.com/pages/camcrankposition.htm

Bob

04-24-2014, 12:28 AM	#1
CA Victoria Senior Member Join Date: Feb 2011 Posts: 2,113	Block measurement? For someone with an original drawing: What the measurement from the cam center to the pan rail on an A Block? What is diameter of the crank bore before Babbitt? __________________ Tim Downtown, Ca

04-24-2014, 04:26 AM	#2
colin1928 Senior Member Join Date: Mar 2013 Location: Australa Melbourne Posts: 878	Re: Block measurement? Camshaft centre from rail is 2.875-2.878 If I remember correct Main bore is 1.6875 (1. 11/16) ?? Cam to Crank centre line is 4.155 Colin

04-24-2014, 07:39 AM	#3
CA Victoria Senior Member Join Date: Feb 2011 Posts: 2,113	Re: Block measurement? Thanks Colin. T. __________________ Tim Downtown, Ca

04-24-2014, 10:57 AM	#4
Bob C Senior Member Join Date: May 2010 Location: So Cal Posts: 8,751	Re: Block measurement? Sponsored Links (Register now to hide all advertisements) Vince shows the same as Colin http://www.fordgarage.com/pages/camcrankposition.htm Bob