|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
11-07-2021, 11:38 AM | #1 |
Senior Member
Join Date: Sep 2021
Location: summerton, sc
Posts: 353
|
8cm heads on 59ab block
Could i put those heads on my 59ab block and is there a rad hoes that would fit?
thanks kurt |
11-07-2021, 12:28 PM | #2 |
Senior Member
Join Date: May 2010
Location: Oshkosh, Wi
Posts: 4,526
|
Re: 8cm heads on 59ab block
You can put the heads on. You'll need to block a small coolant hole at the front of each head. I would not consider this as a good change. 8CM heads have pretty large combustion chambers and will lower your compression ratio. Hence power.
|
Sponsored Links (Register now to hide all advertisements) |
|
11-07-2021, 12:37 PM | #3 |
Senior Member
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,431
|
Re: 8cm heads on 59ab block
The compression was lowered on the 255 to compare closely with the ratio on the 239. I guess they were worried about detonation under extreme load. EAB heads would be better and 8BA are next in line.
The universal ribbed radiator hoses may work if they are still available. It depends on what radiator it's connecting up to. |
11-08-2021, 01:40 PM | #4 |
Senior Member
Join Date: May 2010
Location: Coral Springs FL
Posts: 10,941
|
Re: 8cm heads on 59ab block
kurt: Installing 8CM heads on a 59AB is a bad idea. You gain nothing. Don't do it.
|
11-08-2021, 08:42 PM | #5 |
Senior Member
Join Date: May 2010
Location: Chester Vt
Posts: 8,860
|
Re: 8cm heads on 59ab block
Very.
Gramps |
11-08-2021, 09:00 PM | #6 |
Senior Member
Join Date: Nov 2015
Location: North Pole, Alaska
Posts: 2,651
|
Re: 8cm heads on 59ab block
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|