Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 08-02-2017, 02:13 PM   #1
callbald
Senior Member
 
callbald's Avatar
 
Join Date: Jan 2014
Location: Leo, Indiana
Posts: 174
Default 39 oil pump pick-up tube

I have 3 issues with an oil pickup tube I bought from Mac's.
1> the pickup tube is painted (chipped in several places) and it doesn't make sense to me to have a painted part inside the engine (should I strip it?)
2> The pickup tube that extends inside the cup is recessed into the cup about 1/2 inch verse my original pump that had the tube extended to level with the cup rim.
3> When mounted to the pump body, the pickup cup is angled about 1/4 in front to back.

No matter what the oil pan baffle has to be reworked

see pictures.
Attached Images
File Type: jpg angled cup.JPG (113.3 KB, 6 views)
File Type: jpg old pump cup.jpg (53.5 KB, 7 views)
File Type: jpg recessed pickup.JPG (77.1 KB, 6 views)
File Type: jpg scraped pickup.JPG (115.8 KB, 5 views)
callbald is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 06:09 PM.