The Ford Barn

nbrskn · 10-17-2013, 11:41 AM

would the solonoid ,governor and internal parts be compatable with
the ford OD. Stud is a T96 1A --WG DIv. the solonoid has 3 wires to it.
came out of a 1969 6cyl Stud. Bolt patern is 6x4 at bell houseing and
4x4 where OD attaches to rear of trans. Can buy reasonable. Trans is
very small. Thanks.

Vic Piano · 10-17-2013, 12:05 PM

I thought Studebaker stopped building cars in ’64 in the U.S., and '66 in Canada...? They did use BW overdrives like Ford (from the early '50's) so its possible that it could work but I would check its origin.

Mike B · 10-17-2013, 01:26 PM

https://www.fordbarn.com/forum/showth...ght=studebaker

rotorwrench · 10-17-2013, 03:21 PM

Sponsored Links (Register now to hide all advertisements)

Borg Warner made many different designs for many different manufacturers. They sometimes have parts that cross over but I wouldn't count on it.

10-17-2013, 11:41 AM	#1
nbrskn Senior Member Join Date: Feb 2011 Posts: 103	is studebaker overdrive worth buying would the solonoid ,governor and internal parts be compatable with the ford OD. Stud is a T96 1A --WG DIv. the solonoid has 3 wires to it. came out of a 1969 6cyl Stud. Bolt patern is 6x4 at bell houseing and 4x4 where OD attaches to rear of trans. Can buy reasonable. Trans is very small. Thanks.

10-17-2013, 12:05 PM	#2
Vic Piano Senior Member Join Date: May 2010 Location: Odessa, FL Posts: 7,611	Re: is studebaker overdrive worth buying I thought Studebaker stopped building cars in ’64 in the U.S., and '66 in Canada...? They did use BW overdrives like Ford (from the early '50's) so its possible that it could work but I would check its origin. __________________ Imagination is more important than knowledge.

10-17-2013, 01:26 PM	#3
Mike B Senior Member Join Date: May 2010 Location: Oakdale,Ca Posts: 1,323	Re: is studebaker overdrive worth buying https://www.fordbarn.com/forum/showth...ght=studebaker

10-17-2013, 03:21 PM	#4
rotorwrench Senior Member Join Date: Jun 2010 Location: San Antonio, Texas Posts: 16,432	Re: is studebaker overdrive worth buying Sponsored Links (Register now to hide all advertisements) Borg Warner made many different designs for many different manufacturers. They sometimes have parts that cross over but I wouldn't count on it.