|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
11-19-2019, 02:52 AM | #1 |
Senior Member
Join Date: May 2010
Location: New Zealand
Posts: 298
|
33/34 Cabriolet Question.
Just a minor question here.
Putting the windows back inside the cabriolet doors at present and am not sure what the fixing is at the top of the front door channel that screws thru the top of the door jamb. Was it just a bolt or a flat head screw. Obviously not a countersunk screw as there is no provision for the countersunk head. Anyone out there with an original cabriolet that could have a look for me Thanks Graham. |
11-20-2019, 03:07 PM | #2 |
Senior Member
Join Date: May 2010
Location: New Zealand
Posts: 298
|
Re: 33/34 Cabriolet Question.
Any assistance here?
|
Sponsored Links (Register now to hide all advertisements) |
|
11-20-2019, 03:55 PM | #3 |
Senior Member
Join Date: Jun 2010
Location: St Croix Falls WI
Posts: 2,080
|
Re: 33/34 Cabriolet Question.
Front and rear are both slotted .
Front is flat and rear is countersunk on the engagement side . Front one is flat on the exposed surface and rear is domed . I can take pics if needed but the doors are kinda buried in the corner . You do have the spring loaded tracks ? Should be . |
11-20-2019, 06:55 PM | #4 |
Senior Member
Join Date: May 2010
Location: New Zealand
Posts: 298
|
Re: 33/34 Cabriolet Question.
Sponsored Links (Register now to hide all advertisements)
Exactly the information i was looking for and confirms what i thought was the way things went. Yes i have the spring loaded tracks. Graham |
|
|
Sponsored Links (Register now to hide all advertisements) |
|