Fan oil

[30-9]

As previously mention I’m getting 40 coupe ready for long trip. Reading shop manual it says, remove screw, use tranny gear oil (1 oz) and then prior to putting screw back turn fan (placing cloth under) and only excess oil will come out. Return to top position and put screw back.

I’m not doubting the Bible (and maybe to difficult to explain) but curious how this is designed to work.

[JSeery]

Are you sure, believe that should be engine oil. I think you drain it because the fan assemble will throw it all over the place if it is full.

I just checked 4 different lubrication sources and they all specify engine oil.

[30-9]

Thanks double checked. You again are correct.

Don’t ask where I got tranny gear oil????

[Kube]

Originally Posted by 30-9

As previously mention I’m getting 40 coupe ready for long trip. Reading shop manual it says, remove screw, use tranny gear oil (1 oz) and then prior to putting screw back turn fan (placing cloth under) and only excess oil will come out. Return to top position and put screw back.

I’m not doubting the Bible (and maybe to difficult to explain) but curious how this is designed to work.

One problem - a fan on a '40 doesn't get oiled.

[JSeery]

"One problem - a fan on a '40 doesn't get oiled."

Details, details!

[V8COOPMAN]

Sponsored Links (Register now to hide all advertisements)

Originally Posted by JSeery

"One problem - a fan on a '40 doesn't get oiled."

Details, details!

Kube is correct, as usual. '40 fans are glued directly to the crankshaft. It's the '42-'48 fans that do the weird oiling. DD

[JSeery]

I'm not that familiar with 41s, but the 41 lube charts also list oil the fan on them. Any insight? Did they move the fan off of the crank in 41?

[V8COOPMAN]

Originally Posted by JSeery

I'm not that familiar with 41s, but the 41 lube charts also list oil the fan on them. Any insight? Did they move the fan off of the crank in 41?

J.....I was pretty sure that '41s still had the fan on the crank. Nevertheless, VanPelt's site shows '42-onward for the weird-oiling fan hub. DD

[30-9]

Originally Posted by Kube

One problem - a fan on a '40 doesn't get oiled.

You are correct. Sorry senior here... my 40 has a later engine

[Ken/Alabama]

Think it does take gear oil. I have a service bulletin somewhere that calls for 90wt and it was a change from engine oil.

[estout81]

I use 30W non detergent oil in mine. When you take the hub apart and see how it's made it looks to me like 90W is too thick to lubricate properly. I have 12,000+ miles and no trouble.

[rotorwrench]

I do believe the Ford SB did make a change for those that had seeping problems as was mentioned. I don't know if they ever changed the standard procedure though. Seepy fans were a sign of wear of the internal metal on metal journal bearings or deterioration of the flange gasket joint. New parts are available for that type of fan. Ford used them into the 8BA era for some trucks & early 49 Mercury cars. The reservoir is filled to the bearing line and any over fill drains out when it's rotated with the fill hole down. They don't really hold a lot of oil.

[19Fordy]

Kube, you're the best!

[Kube]

Originally Posted by 19Fordy

Kube, you're the best!

Um, dare I ask.. "the best what"?

[51woodie]

30-9. I would suggest that you remove the fan assembly and dismantle it to get rid of the old oil and clean it up. You have no way of draining the old oil without tearing it down. You will need two gaskets, that you can make yourself. When I opened up the fan hub from my 46, there was some gooey stuff in the housing. I cleaned, assembled and filled as per the service manual with HD30 motor oil. 600 miles so far and no problems.

[JSeery]

Anyone have a 1940 owners manual with a lubrication chart in it? I have a copy of what is ID'd as a 1940 Deluxe chart that list engine oil for the fan. So either the chart is miss-ID'd or Ford wasn't that careful in checking the changes from year to year on their charts. Not a big deal by any means, just seemed interesting.

[40 Deluxe]

Originally Posted by JSeery

Anyone have a 1940 owners manual with a lubrication chart in it? I have a copy of what is ID'd as a 1940 Deluxe chart that list engine oil for the fan. So either the chart is miss-ID'd or Ford wasn't that careful in checking the changes from year to year on their charts. Not a big deal by any means, just seemed interesting.

I have an original copy of the "1940 Service Data Handbook" which was in the glovebox of a low mileage (33,000) '40 my Dad bought from the original owner in1989. The "Lubrication and Maintenance Chart" reads the same as yours except for the heading at the top of the page. Mine reads "Mercury, Deluxe Ford V8, Ford V8 & Ford Commercial". So they printed the same information in at least two different manuals. What's interesting in my manual is that in the illustration showing component locations, there is no "C" pointing to the fan, just generator and distributor.

[adileo]

Jerry

I have it at home. Will send later.

[adileo]

Originally Posted by JSeery

Anyone have a 1940 owners manual with a lubrication chart in it? I have a copy of what is ID'd as a 1940 Deluxe chart that list engine oil for the fan. So either the chart is miss-ID'd or Ford wasn't that careful in checking the changes from year to year on their charts. Not a big deal by any means, just seemed interesting.

Jerry I hope this is readable. If not let me know, I’ll try again

[KGS]

Originally Posted by JSeery

Anyone have a 1940 owners manual with a lubrication chart in it? I have a copy of what is ID'd as a 1940 Deluxe chart that list engine oil for the fan. So either the chart is miss-ID'd or Ford wasn't that careful in checking the changes from year to year on their charts. Not a big deal by any means, just seemed interesting.

You posted this one on the "greasing" thread a few days ago. Isn't this one a '40? It doesn't have a greasable fan hub on it.
Ken