|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
03-22-2012, 09:37 AM | #1 |
Member
Join Date: May 2010
Location: Wisconsin,USA
Posts: 97
|
36 headlight wiring harness
I'm preparing to replace the headlight harness on my 36.
Will there be a problem pulling headlight socket pigtail through headlight stands or should I remove lights to feed through? I tried pulling old wiring out and it's not moving. Thanks! |
03-22-2012, 05:32 PM | #2 |
Senior Member
Join Date: May 2010
Posts: 4,750
|
Re: 36 headlight wiring harness
There is a problem, the three wires are the same length and three terminals will not fit through the hole at the same time. I cut two of the terminals off and then pull the harness in using a string through the hole to assist, then resolder the two terminals, but make each one shorter than the next in case they have to come out.
|
Sponsored Links (Register now to hide all advertisements) |
|
03-23-2012, 05:39 AM | #3 |
Member
Join Date: May 2010
Location: Wisconsin,USA
Posts: 97
|
Re: 36 headlight wiring harness
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|