The Ford Barn

sunshine · 08-12-2019, 03:14 PM

Has anyone used the New Carbs. From carpenter . If so how well did they work .I sure have not add any good results by sending mine away for a rebuild. Thanks for any feed back .BOB

Mac VP · 08-12-2019, 05:02 PM

We’ve been selling them for about 3 years. Had only one returned and its only problem was that it was run with dirty fuel. These are all run on a test engine (and adjusted accordingly as needed) before packing up in their carton for orders. It’s as close as “plug and play “ as you can get.

We keep all three versions in stock:
59A-9510
8BA-9510
8RT-9510

Pat/Ohio · 08-12-2019, 05:16 PM

I purchased one from DC about 3 years ago to take as a spare while traveling to the Black Hills (South Dakota) in my '50. Well, my original started acting up while in Deadwood, SD and I promptly installed the DC unit and it ran great right out of the box. I sent my original to Charley/NY and had him rebuild it. I am now running the original carb and the DC unit is back in the box waiting for another trip!

big job · 08-13-2019, 05:46 AM

We bought one also from Dennis for a fresh EBA V8 runs perfectly out of the box.

Ford Freak · 08-13-2019, 08:20 AM

I also purchased one from Carpenter . Install it & go . I did adjust the idle a bit , but that was all . Great product !

TJ · 08-13-2019, 08:39 AM

Sponsored Links (Register now to hide all advertisements)

I put one on a friend's '40 pickup due to the original being totally wore out. It ran great right out of the box. Friend is very happy with it.

Dave Castle · 08-13-2019, 10:35 AM

Put one on a 59A, ran great after adjusting it correctly.

sunshine · 08-13-2019, 02:23 PM

Has anyone seen the recent price increase !!!!! 224 to. 439: BOB

08-12-2019, 03:14 PM	#1
sunshine Senior Member Join Date: Feb 2011 Location: SUNSHINE MD. Posts: 318	New Carpenter Carb.?. Has anyone used the New Carbs. From carpenter . If so how well did they work .I sure have not add any good results by sending mine away for a rebuild. Thanks for any feed back .BOB

08-12-2019, 05:02 PM	#2
Mac VP Senior Member Join Date: May 2010 Location: Cincinnati, OH Posts: 1,361	Re: New Carpenter Carb.?. We’ve been selling them for about 3 years. Had only one returned and its only problem was that it was run with dirty fuel. These are all run on a test engine (and adjusted accordingly as needed) before packing up in their carton for orders. It’s as close as “plug and play “ as you can get. We keep all three versions in stock: 59A-9510 8BA-9510 8RT-9510 __________________ VANPELT SALES LLC Cincinnati, Ohio Office: 513-724-9486 www.vanpeltsales.com www.classictransmission.com

08-12-2019, 05:16 PM	#3
Pat/Ohio Senior Member Join Date: May 2010 Location: Wilmington, OH/Lakeland, FL Posts: 951	Re: New Carpenter Carb.?. I purchased one from DC about 3 years ago to take as a spare while traveling to the Black Hills (South Dakota) in my '50. Well, my original started acting up while in Deadwood, SD and I promptly installed the DC unit and it ran great right out of the box. I sent my original to Charley/NY and had him rebuild it. I am now running the original carb and the DC unit is back in the box waiting for another trip!

08-13-2019, 05:46 AM	#4
big job Senior Member Join Date: Sep 2013 Location: Dighton, Mass Posts: 1,230	Re: New Carpenter Carb.?. We bought one also from Dennis for a fresh EBA V8 runs perfectly out of the box.

08-13-2019, 08:20 AM	#5
Ford Freak Senior Member Join Date: Feb 2013 Location: Pittsford NY. USA Posts: 1,096	Re: New Carpenter Carb.?. I also purchased one from Carpenter . Install it & go . I did adjust the idle a bit , but that was all . Great product !

08-13-2019, 08:39 AM	#6
TJ Senior Member Join Date: May 2010 Location: Napa,California Posts: 6,023	Re: New Carpenter Carb.?. Sponsored Links (Register now to hide all advertisements) I put one on a friend's '40 pickup due to the original being totally wore out. It ran great right out of the box. Friend is very happy with it.

08-13-2019, 10:35 AM	#7
Dave Castle Senior Member Join Date: Jun 2017 Location: Carmel, Ca Posts: 269	Re: New Carpenter Carb.?. Put one on a 59A, ran great after adjusting it correctly. __________________ "If you do not want to hear the answer, don't ask the question!"

08-13-2019, 02:23 PM	#8
sunshine Senior Member Join Date: Feb 2011 Location: SUNSHINE MD. Posts: 318	Re: New Carpenter Carb.?. Has anyone seen the recent price increase !!!!! 224 to. 439: BOB

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode