|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
05-01-2017, 08:37 PM | #1 |
Member
Join Date: Jun 2010
Posts: 95
|
Fire wall 1932 truck
Need pictures of model B fire wall to show location of assorted wiring,pedal,speedo cable , dist wire, etc thanks steve
|
05-01-2017, 09:07 PM | #2 |
Senior Member
Join Date: May 2010
Location: Southern California
Posts: 7,032
|
Re: Fire wall 1932 truck
steve,
You should be able to find what you need in "The 1932 Ford Book" from the Early Ford V8 Club, https://www.earlyfordv8.org/Shop.cfm?id=15&pid=2 The pickup truck should have the same firewall as the passenger car. It will also contain answers to other questions that you didn't even know you had. Charlie Stephens |
Sponsored Links (Register now to hide all advertisements) |
|
05-01-2017, 09:36 PM | #3 |
Member
Join Date: Jun 2010
Posts: 95
|
Re: Fire wall 1932 truck
I have those books 1, 2 They are great ,but i need more detail on the wall. thanks, steve
|
05-01-2017, 11:06 PM | #4 |
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,101
|
Re: Fire wall 1932 truck
Please refer to the colored photos of the B engine compartment in Chapter 5. Between the two of them you'll see where everything is routed and/or attached.
|
05-02-2017, 07:30 AM | #5 |
Member
Join Date: Jun 2010
Posts: 95
|
Re: Fire wall 1932 truck
Thanks,I have seen those pics and they are hard to see details in the book, dark, and they are more focused on engine rather than wall. Need a different angle straight at wall ,showing a little of the side of engine and more toward wall . sorry to be a pain .
|
05-02-2017, 07:45 AM | #6 |
Senior Member
Join Date: May 2010
Location: Near Rising Sun, Maryland
Posts: 10,858
|
Re: Fire wall 1932 truck
Sponsored Links (Register now to hide all advertisements)
__________________
John "Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein |
05-03-2017, 06:36 PM | #7 |
Member
Join Date: Jun 2010
Posts: 95
|
Re: Fire wall 1932 truck
I sent you a message to send pics, maybe you did not get it. e-mail [email protected]
|
05-04-2017, 09:02 AM | #8 |
Member
Join Date: Sep 2010
Location: Pine Island, NY
Posts: 98
|
Re: Fire wall 1932 truck
if you tell me specifically what you need I can take pics. my wiring is no good, but anything else.
|
05-08-2017, 12:42 PM | #9 |
Senior Member
Join Date: May 2010
Location: Northwest CT
Posts: 503
|
Re: Fire wall 1932 truck
Steve,
These might help, I've collected a lot of images for my work on my wagon. These are from a 32 woodie in Oregon. Keep V-8ing and 4-banging!
__________________
She just don't have the appetite For gas somehow, And Dad, I got four carburetors Hooked up on it now. I tried to hook another To see if I'd do a little good, But ain't no place to put it 'Less I perforate the hood. Wanted, lower side sections of 32 radiator cowl. |
05-08-2017, 03:12 PM | #10 |
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,101
|
Re: Fire wall 1932 truck
With respect, if the objective is originality, there's a lot going on in those two photos that is misleading.
|
05-12-2017, 12:45 PM | #11 |
Member
Join Date: Jun 2010
Posts: 95
|
Re: Fire wall 1932 truck
Thanks to all I think I got it figured out. there is alot going on and alot of holes. Anybody know what the clinch nut (5/16 fne thread) on the driver side fire wall is for ????? Thanks, Steve
|
05-12-2017, 01:29 PM | #12 |
Senior Member
Join Date: May 2010
Location: Southern California
Posts: 7,032
|
Re: Fire wall 1932 truck
Do you mean the hole in the first picture that is located about 8 inches from where the never adopted vacuum was to be mounted? If no how about a picture. If yes I assume that it was for the vacuum operated clutch. The second photo shows the same threaded hole in a later firewall. DO NOT use these photos for other information as the cars are neither restored or original.
Charlie Stephens |
05-12-2017, 04:33 PM | #13 |
Member
Join Date: Jun 2010
Posts: 95
|
Re: Fire wall 1932 truck
yes that is the one , thanks, steve
|
05-15-2017, 07:48 AM | #14 | |
Senior Member
Join Date: May 2010
Location: Northwest CT
Posts: 503
|
Re: Fire wall 1932 truck
Quote:
Thanks for keeping me informed. I appreciate your knowledge for 32's. Keep V-8ing and 4-banging!
__________________
She just don't have the appetite For gas somehow, And Dad, I got four carburetors Hooked up on it now. I tried to hook another To see if I'd do a little good, But ain't no place to put it 'Less I perforate the hood. Wanted, lower side sections of 32 radiator cowl. |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|