|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
02-27-2017, 03:38 PM | #1 |
Member
Join Date: May 2010
Location: Boston, Ma.
Posts: 73
|
'32 Ford Front Fender Bolt\Screw Die
Does anyone make a Die to put the raised area on the fender, around the bolt holes that goes thru to the front frame horn??.....thx
|
02-27-2017, 06:31 PM | #2 |
Senior Member
Join Date: May 2010
Location: Everett, WA
Posts: 504
|
Re: '32 Ford Front Fender Bolt\Screw Die
After making a die for myself I was told that the dimples are reproduced for Model A's.
See http://www.snydersantiqueauto.com/steel-fenders |
Sponsored Links (Register now to hide all advertisements) |
|
02-27-2017, 06:48 PM | #3 |
Senior Member
Join Date: May 2010
Location: Oregon
Posts: 1,265
|
Re: '32 Ford Front Fender Bolt\Screw Die
Years ago my father adapted a pipe union for a die for the dimple... sorry dont know what size he used.
|
02-28-2017, 08:41 AM | #4 |
Senior Member
Join Date: May 2010
Location: Northwest CT
Posts: 503
|
Re: '32 Ford Front Fender Bolt\Screw Die
I got this from a thread on the HAMB. Not sure if all the info. is up to date, but you can give it a try.
32 Fender Patch Frank Borowitz Premier Frame & Body 3029 W. Clarendon Phoenix, AZ. 85017 602-248-0812 He also makes patches for the front fenders of a 32 where screws go though to the frame in front Keep V-8ing and 4-banging!
__________________
She just don't have the appetite For gas somehow, And Dad, I got four carburetors Hooked up on it now. I tried to hook another To see if I'd do a little good, But ain't no place to put it 'Less I perforate the hood. Wanted, lower side sections of 32 radiator cowl. |
02-28-2017, 09:23 AM | #5 | |
Senior Member
|
Re: '32 Ford Front Fender Bolt\Screw Die
Quote:
|
|
02-28-2017, 11:28 PM | #6 |
Member
Join Date: May 2010
Location: Boston, Ma.
Posts: 73
|
Re: '32 Ford Front Fender Bolt\Screw Die
Sponsored Links (Register now to hide all advertisements)
|
03-03-2017, 01:37 PM | #7 |
Senior Member
Join Date: May 2010
Location: Northwest CT
Posts: 503
|
Re: '32 Ford Front Fender Bolt\Screw Die
Zeke,
Try this number: (602) 267-1319 Keep V-8ing and 4-banging!
__________________
She just don't have the appetite For gas somehow, And Dad, I got four carburetors Hooked up on it now. I tried to hook another To see if I'd do a little good, But ain't no place to put it 'Less I perforate the hood. Wanted, lower side sections of 32 radiator cowl. |
03-04-2017, 10:24 PM | #8 |
Member
Join Date: Oct 2010
Location: small town Iowa
Posts: 55
|
Re: '32 Ford Front Fender Bolt\Screw Die
If you know someone with a metal lathe it is not difficult to make a pair of dies having a thru-bolt to pull them together. Receiver die on top, pusher below--make them out of scrap mild steel. Slick solution.
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|