|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
08-15-2017, 01:13 PM | #1 |
Senior Member
Join Date: Dec 2013
Location: Mossel Bay, about 300km from Cape Town
Posts: 530
|
E-brake carrier
Hi Gents,
Please help, my RH E-brake has inadvertantly engaged, by itself, a few times. I managed to find and fit a reasonably good carrier but the contact points between the shoe and the carrier needs refacing and I need some help under standing the correct angles required. Take a look at the photo and sketch attached and please advise me of the recommended angles required depicted by the red arrows. Regards Chris
__________________
Regards Chris Cape Town 28 Model A RPU, 29 Chevy Phaeton, 67 E Type FHC, 67 250SL Pagoda, 83 911 SC |
08-16-2017, 12:10 AM | #2 |
Senior Member
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
|
Re: E-brake carrier
Here's a picture that might help.
|
Sponsored Links (Register now to hide all advertisements) |
|
08-16-2017, 01:46 AM | #3 |
Senior Member
Join Date: Dec 2013
Location: Mossel Bay, about 300km from Cape Town
Posts: 530
|
Re: E-brake carrier
Sponsored Links (Register now to hide all advertisements)
Much appreciated, I thought as much and trimmed the contact surfaces nice and square as in your photo. Regards Chris |
|
|
Sponsored Links (Register now to hide all advertisements) |
|