The Ford Barn

sphooch · 02-12-2020, 02:42 PM

Hi guys , I am replacing the pitman arm on my roadster, I bought a new arm from Brattons along with a rebuild kit. by error they sent me the Teflon set instead of the steel set as original. has any one installed this set up on there car, if so is it as good as the steel set??. they were very nice about it but I decided to maybe install it. any advice will be appreciated . thanks THE HOOCH

J Franklin · 02-12-2020, 02:53 PM

Go ahead and install it, I think you will enjoy easier steering.

wmws · 02-12-2020, 03:08 PM

Sponsored Links (Register now to hide all advertisements)

I have Teflon on my car. Works fine. No problems.

02-12-2020, 02:42 PM	#1
sphooch Senior Member Join Date: Jan 2012 Location: New Jersey Posts: 356	question drag link rebuild Hi guys , I am replacing the pitman arm on my roadster, I bought a new arm from Brattons along with a rebuild kit. by error they sent me the Teflon set instead of the steel set as original. has any one installed this set up on there car, if so is it as good as the steel set??. they were very nice about it but I decided to maybe install it. any advice will be appreciated . thanks THE HOOCH

02-12-2020, 02:53 PM	#2
J Franklin Senior Member Join Date: May 2010 Location: Oregon Posts: 5,959	Re: question drag link rebuild Go ahead and install it, I think you will enjoy easier steering.

02-12-2020, 03:08 PM	#3
wmws BANNED Join Date: Feb 2013 Location: Coatesville, Pa Posts: 719	Re: question drag link rebuild Sponsored Links (Register now to hide all advertisements) I have Teflon on my car. Works fine. No problems.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode