Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 01-17-2020, 09:18 PM   #1
James G.
Senior Member
 
Join Date: May 2010
Location: maryland
Posts: 183
Default Head light focusing procedure

I'm finally convinced that my night time driving issue with my Tudor headlight must be focusing. I've cleaned the reflectors, checked the headlamp bulbs, all in excellent shape. Where can I find/get a copy of this steps/procedure? Any/all help greatly appreciated! Jim Gregory, GBMAFC
James G. is offline   Reply With Quote
Old 01-17-2020, 09:26 PM   #2
Gary WA
Senior Member
 
Gary WA's Avatar
 
Join Date: May 2010
Location: Clinton,WA/Whidbey Island
Posts: 4,088
Default Re: Head light focusing procedure

Model A Ford Mechanics Handbook Vol1 by Les Andrews sold on MAFCA or Model A Vendors Berts,Brattons etc.
__________________
www.whidbeymodelaclub.com
Gary WA is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 01-17-2020, 09:29 PM   #3
Gary WA
Senior Member
 
Gary WA's Avatar
 
Join Date: May 2010
Location: Clinton,WA/Whidbey Island
Posts: 4,088
Default Re: Head light focusing procedure

may help?
Attached Images
File Type: jpg hl.jpg (51.3 KB, 54 views)
File Type: jpg hl2.jpg (45.7 KB, 66 views)
__________________
www.whidbeymodelaclub.com
Gary WA is offline   Reply With Quote
Old 01-17-2020, 10:16 PM   #4
Ranchero50
Senior Member
 
Join Date: Aug 2019
Location: Hagerstown MD
Posts: 224
Default Re: Head light focusing procedure

Ultimately take the car out to a dark section of abandoned road and adjust them there so you can see stop signs and the road in front of you. I do it at industrial areas.
__________________
Building a '29 Speedster, the hard way...
Ranchero50 is offline   Reply With Quote
Old 01-17-2020, 10:20 PM   #5
Dennisfly
Senior Member
 
Dennisfly's Avatar
 
Join Date: Oct 2019
Location: Virginia
Posts: 140
Default Re: Head light focusing procedure

I believe it is also in the Model A instruction Book
__________________
1929 Town Sedan (Briggs) 155B, Mitchell Overdrive
1935 Model 48 Tudor
Dennisfly is offline   Reply With Quote
Old 01-17-2020, 10:44 PM   #6
GMCPASO
Member
 
GMCPASO's Avatar
 
Join Date: May 2011
Location: Paso Robles, California
Posts: 64
Default Re: Head light focusing procedure

Sponsored Links (Register now to hide all advertisements)
It helps if it is a foggy night also.
GMCPASO is offline   Reply With Quote
Old 01-17-2020, 11:04 PM   #7
ryanheacox
Senior Member
 
ryanheacox's Avatar
 
Join Date: Apr 2013
Location: Northwest CT
Posts: 1,092
Default Re: Head light focusing procedure

I don't think anyone has asked what reflectors you have? If they are the chromed ones then you may not be able to properly focus the bulbs no matter what you do.
ryanheacox is offline   Reply With Quote
Old 01-18-2020, 12:58 AM   #8
Kurt in NJ
Senior Member
 
Kurt in NJ's Avatar
 
Join Date: May 2010
Location: on the Littlefield
Posts: 6,140
Default Re: Head light focusing procedure

If you take the lens off, shine the light on a wall 25 feet away the property focused beam without the lens will look like this
Attached Images
File Type: jpg IMG_2200.jpg (15.9 KB, 52 views)
Kurt in NJ is offline   Reply With Quote
Old 01-18-2020, 10:32 AM   #9
Badpuppy
Senior Member
 
Join Date: Dec 2017
Location: Guthrie, OK
Posts: 1,140
Default Re: Head light focusing procedure

Quote:
Originally Posted by Gary WA View Post
may help?
The pics are from the Model A instruction book (owner's manual). Beam height is 33" for 28-29, 37" for 30-31 to agree with headlight center height.
Badpuppy is offline   Reply With Quote
Old 01-18-2020, 10:52 AM   #10
captndan
Senior Member
 
captndan's Avatar
 
Join Date: Nov 2015
Location: Tennessee
Posts: 714
Default Re: Head light focusing procedure

Just loosen the nut on the bottom and point the lights wherever you want.
captndan is offline   Reply With Quote
Old 01-18-2020, 12:24 PM   #11
Bob C
Senior Member
 
Join Date: May 2010
Location: So Cal
Posts: 8,711
Default Re: Head light focusing procedure

Quote:
Originally Posted by captndan View Post
Just loosen the nut on the bottom and point the lights wherever you want.

That will work for aiming the beam but it won't do anything for the focus.
Bob C is offline   Reply With Quote
Old 01-18-2020, 01:43 PM   #12
Will N
Senior Member
 
Will N's Avatar
 
Join Date: Jul 2010
Location: Pennsylvania
Posts: 1,096
Default Re: Head light focusing procedure

Quote:
Originally Posted by ryanheacox View Post
I don't think anyone has asked what reflectors you have? If they are the chromed ones then you may not be able to properly focus the bulbs no matter what you do.



Ditto. The repros that were available were not the correct shape and you will never be able to focus them. Bratton's sells a new coated aluminized reflector that is made to the original blueprint, and these can be focused. Of course, so can originals where the silver is in good condition.
Will N is offline   Reply With Quote
Old 01-20-2020, 09:09 AM   #13
29closedcabguy
Member
 
29closedcabguy's Avatar
 
Join Date: Oct 2017
Location: Kingwood Texas
Posts: 30
Default Re: Head light focusing procedure

I was not able to focus my headlights or get as much light out of them as I felt they should produce. I tried everything even led bulbs. Finally I discovered I had the poorly designed crome reflectors. I installed the new aluminum reflectors and BOOM!!!! I now had actually high and low beam not just brighter on high beam. Also the original silver reflectors reflect 95% of the light, chrome reflectivity is only around 65%. The new polished aluminum is 90% reflective. I went from none focused 65% reflectivity to 90% focused lighting. The resulting outcome was like magic.
29closedcabguy is offline   Reply With Quote
Old 01-20-2020, 09:20 AM   #14
ryanheacox
Senior Member
 
ryanheacox's Avatar
 
Join Date: Apr 2013
Location: Northwest CT
Posts: 1,092
Default Re: Head light focusing procedure

Quote:
Originally Posted by 29closedcabguy View Post
I was not able to focus my headlights or get as much light out of them as I felt they should produce. I tried everything even led bulbs. Finally I discovered I had the poorly designed crome reflectors. I installed the new aluminum reflectors and BOOM!!!! I now had actually high and low beam not just brighter on high beam. Also the original silver reflectors reflect 95% of the light, chrome reflectivity is only around 65%. The new polished aluminum is 90% reflective. I went from none focused 65% reflectivity to 90% focused lighting. The resulting outcome was like magic.

Great! I was in the same boat as you, bought new Brattons reflectors and was blown away by the difference.
ryanheacox is offline   Reply With Quote
Old 01-20-2020, 10:26 AM   #15
Ranchero50
Senior Member
 
Join Date: Aug 2019
Location: Hagerstown MD
Posts: 224
Default Re: Head light focusing procedure

Quote:
Originally Posted by 29closedcabguy View Post
I was not able to focus my headlights or get as much light out of them as I felt they should produce. I tried everything even led bulbs. Finally I discovered I had the poorly designed crome reflectors. I installed the new aluminum reflectors and BOOM!!!! I now had actually high and low beam not just brighter on high beam. Also the original silver reflectors reflect 95% of the light, chrome reflectivity is only around 65%. The new polished aluminum is 90% reflective. I went from none focused 65% reflectivity to 90% focused lighting. The resulting outcome was like magic.
That was the problem I found with LED's. The light emitter wasn't at the same spot as the Halogens so the focus was way off.
__________________
Building a '29 Speedster, the hard way...
Ranchero50 is offline   Reply With Quote
Old 01-20-2020, 11:36 AM   #16
Steve Rinaldo
Member
 
Join Date: May 2010
Posts: 89
Default Re: Head light focusing procedure

How do you tell if you have silvered, chrome or aluminum reflectors? Thanks, Steve
Steve Rinaldo is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 08:28 AM.