Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 12-10-2019, 05:31 PM   #1
roughrider
Junior Member
 
Join Date: Jan 2011
Location: New Mexico mountains
Posts: 26
Unhappy Rear axle seal part number?

Is there a modern part number that is available from bearing shops for the rear axle grease seal in the hub? The original # is A-1175.
Just hoping there is a modern version available quickly.
Yea, I know there doesn't seem to be anything that happens quickly on these cars. thanks

roughrider
roughrider is offline   Reply With Quote
Old 12-10-2019, 05:34 PM   #2
J Franklin
Senior Member
 
J Franklin's Avatar
 
Join Date: May 2010
Location: oregon
Posts: 4,062
Default Re: Rear axle seal part number?

What makes a seal "modern" ?
J Franklin is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 12-10-2019, 06:29 PM   #3
rotorwrench
Senior Member
 
rotorwrench's Avatar
 
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 10,788
Default Re: Rear axle seal part number?

The original A 1175 part number was superseded by B 1175 and was used up to 1938. It is 3.19" OD as listed in the green bible. The National part number is 416738 and is listed as 3.194" OD. This number is available through any vendor that handles Timken National seals. It's a rear wheel grease retainer by nomenclature and is for the rear wheel hub bearing on the early banjo rear axles.
rotorwrench is offline   Reply With Quote
Old 12-11-2019, 06:22 AM   #4
roughrider
Junior Member
 
Join Date: Jan 2011
Location: New Mexico mountains
Posts: 26
Default Re: Rear axle seal part number?

Thank you rotorwrench for that great information on the seal!
Hope you have a great "A" Christmas.
roughrider is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 07:49 PM.