Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 11-18-2019, 09:43 PM   #1
Phil Gillespie
Senior Member
 
Phil Gillespie's Avatar
 
Join Date: Sep 2011
Location: Christchurch New Zealand
Posts: 1,098
Default 8ba Heads 7RT or EAB

Have an 8BA fitted to 38 PU. Doing a bit of work on it. Presently have inlet manifold off to check all valve clearances.
This PU runs well with approx 12500 mls on rebuilt engine. I did not do the work. Its presently fitted with 8RT heads C/R 6.8 :1 . I have a good set of EAB heads C/R 7.2 :1 I understand. Would there be any notticeable improvement with changing out these heads. Engine pretty much stock 40 over, Max 1cam and single 97 carb with a newly rebuilt Charlie NY chev distributor fitted with adjustable mech and adjustable vacuum advance. Not sure what present piston to head clearance is.
Thanks,
Phil NZ
Phil Gillespie is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 11:51 AM.