|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
04-23-2020, 09:55 AM | #1 |
Senior Member
Join Date: May 2010
Location: muskegon, mi
Posts: 297
|
Generator (inside) wiring
1 short wire from inside of case to ?
2 red wire from field coil to? 3 yellow wire from field coil to? Thanks Dick |
04-23-2020, 12:04 PM | #2 |
Senior Member
Join Date: May 2010
Location: on the Littlefield
Posts: 6,157
|
Re: Generator (inside) wiring
Sponsored Links (Register now to hide all advertisements)
later generator has one field wire connected to 3rd brush, other wire comes out rubber bushing to be used with oval cutout that has voltage regulator, if no regulator it gets attached to ground at cutout screw, other wire coming out rubber bushing goes to brush opposit grounded brush---other end attaches to cutout(power wire)---- |
Sponsored Links (Register now to hide all advertisements) |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|