Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 06-26-2015, 06:56 AM   #1
Chris in MA
Senior Member
 
Chris in MA's Avatar
 
Join Date: May 2010
Location: Newburyport, MA
Posts: 123
Default 40 Tudor Seat Belt Install Help

I posted this on the V8 Club Forum as well, not sure how many of us are on both...

Hi,
Does anyone who has installed seatbelts in their 38-40 Tudor have photos to share of the location of the anchor bolts for the front belts. Looking for pics of both the inside and under the car. I'm using Julianos belts and anchors.

Much appreciated,
Chris
Chris in MA is offline   Reply With Quote
Old 06-26-2015, 07:34 AM   #2
39flyer
Senior Member
 
Join Date: Aug 2014
Location: Oshkosh, WI
Posts: 107
Default Re: 40 Tudor Seat Belt Install Help

I installed a set of Julianos shoulder harness/belts in the front and seat belts in
the back with no problems.I used the anchor brackets that didn’t need to be
welded in the front. They have a nice set of instructions for the 40
installation on their website, with pictures. They were very helpful with my
questions.
39flyer is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 06-26-2015, 08:50 AM   #3
Chris in MA
Senior Member
 
Chris in MA's Avatar
 
Join Date: May 2010
Location: Newburyport, MA
Posts: 123
Default Re: 40 Tudor Seat Belt Install Help

Thanks 39. Looks like that will do the trick.

http://www.julianos.com/how2_40ford.html
Chris in MA is offline   Reply With Quote
Old 12-21-2015, 11:57 AM   #4
mhsprecher
Senior Member
 
mhsprecher's Avatar
 
Join Date: Aug 2012
Location: Takoma Park, MD
Posts: 2,811
Default Re: 40 Tudor Seat Belt Install Help

Thanks for this thread. I plan to do the same for my 39 Fordor. Instead of welding the plate in, you can buy a B pillar anchor that you can use instead. It is on pg 17 of their catalog.
mhsprecher is offline   Reply With Quote
Old 12-21-2015, 11:46 PM   #5
fordor41
Senior Member
 
fordor41's Avatar
 
Join Date: Oct 2011
Location: elmira,ny
Posts: 1,505
Default Re: 40 Tudor Seat Belt Install Help

Problem when I mounted the belt retractors on the post of my '41 fordor was there was no room between the post and the front seat. I mounted the retractors to the floor under the front seat. Had to sort of reverse the buckets to make the belt lay correctly.
fordor41 is offline   Reply With Quote
Old 12-22-2015, 09:38 AM   #6
fourtydlx
Senior Member
 
fourtydlx's Avatar
 
Join Date: May 2010
Location: bloomington,ca 92316
Posts: 784
Send a message via Yahoo to fourtydlx
Default Re: 40 Tudor Seat Belt Install Help

Sponsored Links (Register now to hide all advertisements)
Put the rt retrackter onthe lft,thelft onthe rt, they will fit in the inside of uph., then run the belt thru the plastic slots that are in late model cars, Work just fine. That's what I did.
fourtydlx is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 05:03 AM.