05-10-2019, 11:16 PM | #1 |
Senior Member
Join Date: May 2010
Location: Sugar Land, TX
Posts: 4,395
|
41 dual MC
Here is a corvette remote fill dual MC in my 41. Not much room for a standard dual MC.
This one could be piped on either side which is nice. https://fordbarn.com/forum/picture.p...ictureid=41663
__________________
41 woodie https://41fordwoodie.weebly.com/ |
05-11-2019, 07:53 AM | #2 |
Member Emeritus
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
|
Re: 41 dual MC
I can't get that link to work?
|
Sponsored Links (Register now to hide all advertisements) |
|
05-11-2019, 08:51 AM | #3 |
Senior Member
Join Date: May 2010
Location: East Hartford, Ct
Posts: 5,898
|
Re: 41 dual MC
The link indicates that the image is in GIF format with just a 1x1 pixel resolution and may have to be converted to JPEG to publish in this forum.
If you magnify and look at the center of the black screen you can see the dot.
__________________
DON'T RECALL DOING SOMETHING FOR MYSELF BASED ON SOMEONE ELSE'S LIKES OR DISLIKES Last edited by 51 MERC-CT; 05-11-2019 at 08:58 AM. |
05-11-2019, 09:32 AM | #4 |
Senior Member
Join Date: May 2010
Location: So Minn
Posts: 1,565
|
Re: 41 dual MC
Well, it is a Chevy part.... maybe it is not meant to be...
|
05-11-2019, 12:50 PM | #5 |
Senior Member
Join Date: May 2010
Location: Sugar Land, TX
Posts: 4,395
|
Re: 41 dual MC
Well, Chev, yes. It was very difficult to find a dual MC that would fit on the 41 and still have access to adding DOT 3.
__________________
41 woodie https://41fordwoodie.weebly.com/ |
05-11-2019, 10:35 PM | #6 |
Senior Member
Join Date: Oct 2011
Location: elmira,ny
Posts: 1,516
|
Re: 41 dual MC
Sponsored Links (Register now to hide all advertisements)
|
05-12-2019, 08:38 PM | #7 | |
Senior Member
Join Date: May 2010
Location: now Kuna, Idaho
Posts: 3,779
|
Re: 41 dual MC
Quote:
To test, crack open a bleeder screw on the front and see if the car still stops. Just push the pedal down once (like in a panic stop situation) and keep holding it down while an assistant closes the bleeder screw (this way you won't have to bleed the system). Repeat for the rear. If the car doesn't stop with two wheels, you have a problem! |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|