Go Back   The Ford Barn > General Discussion > Late V8 (1954+)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 11-09-2019, 09:58 AM   #1
zoegrant
Senior Member
 
zoegrant's Avatar
 
Join Date: Jun 2010
Location: tolland CT
Posts: 629
Default Two barrel card spacer with pcv

Does any company make a two barrel carb spacer with a PCV port ??
zoegrant is offline   Reply With Quote
Old 11-09-2019, 10:23 AM   #2
Anteek29
Senior Member
 
Anteek29's Avatar
 
Join Date: Dec 2014
Location: Santa Maria, CA
Posts: 597
Default Re: Two barrel card spacer with pcv

If not, should be easy to make?
__________________
Alan
1929 Special Coupe
1941 Pick-Up
1955 Victoria
Anteek29 is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 11-09-2019, 10:58 AM   #3
KULTULZ
Senior Member
 
KULTULZ's Avatar
 
Join Date: Aug 2012
Location: WV - Somewhere Between Lost and Found
Posts: 2,300
Question Re: Two barrel card spacer with pcv

Quote:
Originally Posted by zoegrant View Post

Does any company make a two barrel carb spacer with a PCV port ??
What year and carb style? You are upgrading?
__________________


As we got into bed, I asked the wife if there was a chance of having sex tonight ...

As usual, the reply was, "Not likely".

"Well then, can I call a friend"?

And that's when the fight started ...

UPDATE - The doctor said I will walk again but most likely with a limp ...

KULTULZ is offline   Reply With Quote
Old 11-09-2019, 04:00 PM   #4
streetdreams
Senior Member
 
Join Date: Dec 2010
Location: Howell, Michigan, USA, The Peoples Slightly Overspent Demodependancy of Michigan
Posts: 620
Default Re: Two barrel card spacer with pcv

if you're using a 2100 Ford 2 bbl, just about any mid to late '60s 302 or 351W has what you want
streetdreams is offline   Reply With Quote
Old 11-09-2019, 05:27 PM   #5
5851a
Senior Member
 
Join Date: Oct 2014
Location: NE Iowa
Posts: 709
Default Re: Two barrel card spacer with pcv

If you go past 1972 generally you will find it will have a egr valve attached.
5851a is offline   Reply With Quote
Old 11-09-2019, 09:29 PM   #6
paul2748
Senior Member
 
paul2748's Avatar
 
Join Date: May 2010
Location: Midland Park, NJ
Posts: 2,515
Default Re: Two barrel card spacer with pcv

I have seen them advertised, but don't remember the vendor.
__________________
48 Ford Conv
56 Tbird
54 Ford Victoria
paul2748 is offline   Reply With Quote
Old 11-10-2019, 02:23 PM   #7
Hot Rod Reverend
Senior Member
 
Hot Rod Reverend's Avatar
 
Join Date: May 2010
Location: Loveland, Ohio
Posts: 738
Default Re: Two barrel card spacer with pcv

Check speedway automotive for the Stromberg style 2 barrels (3 bolt mounting bases) - they should have different heights. Also... and I hate to say it, ebay.

https://www.ebay.com/itm/For-Strombe...AAAOxydB1Si8re
__________________
Loveland, Ohio
Visit hotrodreverend.com to view hundreds of pictures and videos of the build of the 1955 Ford Club Sedan!
Hot Rod Reverend is offline   Reply With Quote
Old 11-11-2019, 11:32 AM   #8
poolplayer1
Senior Member
 
Join Date: Sep 2015
Posts: 206
Default Re: Two barrel card spacer with pcv

Go to Ebay and in the search bar, type in C4AE-9A589-D and take a look at that spacer.Might be what you are looking for.
poolplayer1 is offline   Reply With Quote
Old 11-11-2019, 02:14 PM   #9
zoegrant
Senior Member
 
zoegrant's Avatar
 
Join Date: Jun 2010
Location: tolland CT
Posts: 629
Default Re: Two barrel card spacer with pcv

I need a 3 bolt mounting base not the 4 bolt...please let me know is someone runs across a supplier...thanks
zoegrant is offline   Reply With Quote
Old 11-11-2019, 05:05 PM   #10
40cpe
Senior Member
 
40cpe's Avatar
 
Join Date: May 2010
Location: Star, MS
Posts: 3,390
Default Re: Two barrel card spacer with pcv

Here you go:

https://www.jalopyjournal.com/forum/...carbs.1172600/
Attached Images
File Type: jpg spacers.jpg (37.9 KB, 7 views)
40cpe is offline   Reply With Quote
Old 11-11-2019, 06:14 PM   #11
KULTULZ
Senior Member
 
KULTULZ's Avatar
 
Join Date: Aug 2012
Location: WV - Somewhere Between Lost and Found
Posts: 2,300
Thumbs up Re: Two barrel card spacer with pcv

Perfect.

Too bad the vendor wasn't listed. Should also consider a phenolic spacer between the carb spacer and carb body.
Attached Images
File Type: jpg Carb Spacer - w Vacuum Inlet.jpg (10.9 KB, 4 views)
File Type: jpg Carb Spacer - Phenolic w Gaskets - H94-S97.jpg (52.8 KB, 5 views)
__________________


As we got into bed, I asked the wife if there was a chance of having sex tonight ...

As usual, the reply was, "Not likely".

"Well then, can I call a friend"?

And that's when the fight started ...

UPDATE - The doctor said I will walk again but most likely with a limp ...

KULTULZ is offline   Reply With Quote
Old 11-11-2019, 06:15 PM   #12
zoegrant
Senior Member
 
zoegrant's Avatar
 
Join Date: Jun 2010
Location: tolland CT
Posts: 629
Default Re: Two barrel card spacer with pcv

40cpe... the spacer on the left, does that have a port for a pcv hose ?
How large an opening is needed for a pcv hose. Looks like a small diameter...thanks for finding this for me. Who is the vendor ?
zoegrant is offline   Reply With Quote
Old 11-11-2019, 08:29 PM   #13
paul2748
Senior Member
 
paul2748's Avatar
 
Join Date: May 2010
Location: Midland Park, NJ
Posts: 2,515
Default Re: Two barrel card spacer with pcv

The seller looks to be a HAMB member (2900 plus posts). It looks like you will have to get a screw in nipple to attach a hose. Contact the seller for info if you are a HAMB member



Quote:
Originally Posted by zoegrant View Post
40cpe... the spacer on the left, does that have a port for a pcv hose ?
How large an opening is needed for a pcv hose. Looks like a small diameter...thanks for finding this for me. Who is the vendor ?
__________________
48 Ford Conv
56 Tbird
54 Ford Victoria
paul2748 is offline   Reply With Quote
Old 11-11-2019, 08:57 PM   #14
40cpe
Senior Member
 
40cpe's Avatar
 
Join Date: May 2010
Location: Star, MS
Posts: 3,390
Default Re: Two barrel card spacer with pcv

Quote:
Originally Posted by zoegrant View Post
40cpe... the spacer on the left, does that have a port for a pcv hose ?
How large an opening is needed for a pcv hose. Looks like a small diameter...thanks for finding this for me. Who is the vendor ?
Click on the HAMB link. You will have to ask those questions to the seller.
40cpe is offline   Reply With Quote
Old 11-12-2019, 07:33 AM   #15
Neal
Senior Member
 
Neal's Avatar
 
Join Date: May 2010
Location: North Dakota
Posts: 129
Default Re: Two barrel card spacer with pcv

Don't the gas heaters (southwinds) have what you are looking for? I do not know if the port is the correct size.


The picture above looks like one.
Neal is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 09:43 PM.