10-23-2019, 06:21 AM | #1 |
Senior Member
Join Date: Jan 2019
Location: Germany, near Aachen
Posts: 1,159
|
Front Tool Box
Hello to each other.
In an other topic post I have first seen that there is a front toolbox for the A. I like it so much that I immediately tried to order one. But my dealers MAC's, Bratton's and - finally dismissive - even Snyder's can not deliver it and there is also no indication when the box is available again. Does anyone know an address where I can still buy the Tool Box? Also used part.
__________________
Beste Gruesse aus Deutschland, Werner Ford Model A, Roadster, 1928 Citroen 11 CV, 1947 Hercules W 2000, 1976; (with NSU-Wankel Rotary Engine), Canadian version |
10-23-2019, 06:36 AM | #2 |
Senior Member
Join Date: Nov 2011
Location: San Diego, CA
Posts: 442
|
Re: Front Tool Box
Almost exactly two years ago, when I was on a quest to get one, Mike's Afordable was the only place that carried them (here's an archive of their product page for it from July, 2016 - note that they call the toolbox "A Mike's Exclusive", implying at the time that they were the only sellers of it)
They don't have it in stock now, but here's their contact page - maybe someone there can let you know if the there are plans to produce/sell them again. |
Sponsored Links (Register now to hide all advertisements) |
|
10-23-2019, 08:20 AM | #3 |
Senior Member
Join Date: May 2010
Location: Durango CO
Posts: 1,309
|
Re: Front Tool Box
Used some 1-1/2" X 1/4" strap and a 14" tool box and made my own. Less than $25.
__________________
No restorable Model A's were harmed in the building of this truck! |
10-23-2019, 08:27 AM | #4 |
Senior Member
Join Date: Jul 2010
Location: upstate NY near Mass border
Posts: 789
|
Re: Front Tool Box
Werner, There are two versions of the tool box if you are talking about the one that fits between the frame horns on the front of the car. One is square like the picture posted. The other is shaped to follow the downward curve of the frame horns. The second one looks like it belongs to the car. Jack
|
10-23-2019, 10:15 AM | #5 | |
Senior Member
Join Date: Jul 2011
Location: Redondo Beach, CA
Posts: 5,849
|
Re: Front Tool Box
Quote:
I was going to buy an extra lid but as usual I blinked and they were gone... Maybe if enough interest they will start selling them again. |
|
10-23-2019, 11:30 AM | #6 | ||||
Senior Member
Join Date: Jan 2019
Location: Germany, near Aachen
Posts: 1,159
|
Re: Front Tool Box
Sponsored Links (Register now to hide all advertisements)
Quote:
Quote:
Quote:
The fact that there was a lid individually makes it easy to replicate. But even the lid is no longer available as a single item. To make this myself, I think it is very difficult to make the longitudinal embossing hardly feasible with sheet and hammer. Quote:
It would be nice if someone opens here a request topic to ask who is interested. Then it turns out how many people would want this nice box.
__________________
Beste Gruesse aus Deutschland, Werner Ford Model A, Roadster, 1928 Citroen 11 CV, 1947 Hercules W 2000, 1976; (with NSU-Wankel Rotary Engine), Canadian version |
||||
10-23-2019, 12:34 PM | #7 |
Senior Member
Join Date: May 2010
Location: Long Island, NY
Posts: 3,470
|
Re: Front Tool Box
I had no difficulty buying this tool box this year from my local dealer. It has a much larger capacity than the curved tool box.
__________________
Bob Bidonde Last edited by Bob Bidonde; 10-23-2019 at 12:49 PM. |
10-23-2019, 12:56 PM | #8 |
Senior Member
Join Date: Jan 2019
Location: Germany, near Aachen
Posts: 1,159
|
Re: Front Tool Box
Hallo,
I already have a square tool box. On the right side on the step board. But for the front I would like to have such a very nice oval box. It integrates so beautifully that it looks like Henry Ford designed it himself. If the oval box is mounted on the front, then I remove the square box.
__________________
Beste Gruesse aus Deutschland, Werner Ford Model A, Roadster, 1928 Citroen 11 CV, 1947 Hercules W 2000, 1976; (with NSU-Wankel Rotary Engine), Canadian version |
10-23-2019, 01:39 PM | #9 |
Senior Member
|
Re: Front Tool Box
|
10-23-2019, 02:26 PM | #10 | |
Senior Member
Join Date: Jul 2011
Location: Redondo Beach, CA
Posts: 5,849
|
Re: Front Tool Box
Quote:
Last edited by Y-Blockhead; 10-23-2019 at 10:56 PM. |
|
10-23-2019, 02:32 PM | #11 |
Senior Member
Join Date: Dec 2013
Location: Mossel Bay, about 300km from Cape Town
Posts: 530
|
Re: Front Tool Box
What a beauty
__________________
Regards Chris Cape Town 28 Model A RPU, 29 Chevy Phaeton, 67 E Type FHC, 67 250SL Pagoda, 83 911 SC |
10-23-2019, 03:22 PM | #12 |
Senior Member
Join Date: Jul 2011
Location: Redondo Beach, CA
Posts: 5,849
|
Re: Front Tool Box
Thanks Floats.
|
10-23-2019, 03:55 PM | #13 |
Senior Member
Join Date: May 2010
Location: Durango CO
Posts: 1,309
|
Re: Front Tool Box
Found a photo of my $25 tool box
__________________
No restorable Model A's were harmed in the building of this truck! |
10-23-2019, 03:59 PM | #14 |
Member
Join Date: Feb 2019
Posts: 36
|
Re: Front Tool Box
|
10-23-2019, 04:36 PM | #15 |
Senior Member
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 7,496
|
Re: Front Tool Box
I made my tool box with a curved lid just like the ones the vendors sold. I only used a few pieces of offcuts from another project so the cost was virtually nothing.
Werner, maybe you could find someone to fabricate one for you - who knows, you might even sell a few. BTW, the hinge is along the bottom edge of the front of the box, not at the back of the lid.
__________________
I'm part of the only ever generation with an analogue childhood and a digital adulthood. |
10-23-2019, 05:10 PM | #16 |
Senior Member
Join Date: Oct 2019
Location: Stoneboro PA
Posts: 120
|
Re: Front Tool Box
|
10-23-2019, 08:56 PM | #17 |
Senior Member
Join Date: May 2010
Location: Englewood, Colorado
Posts: 1,372
|
Re: Front Tool Box
We have one in stock at Bert’s Model A Center . Modelastore.com.
Steve @ Bert’s |
10-23-2019, 10:53 PM | #18 |
Senior Member
Join Date: Aug 2012
Posts: 881
|
Re: Front Tool Box
Steve, do you normally stock the tool box Mr. Blockhead shows in post #5? If so I am interested in purchasing one.
__________________
The Master Cylinder Enjoying life at the beach in SoCal... |
10-24-2019, 03:29 AM | #19 | |
Senior Member
Join Date: Jan 2019
Location: Germany, near Aachen
Posts: 1,159
|
Re: Front Tool Box
An Jack Wingard:
Quote:
An Steeve B 31: If I look at your shop-page there is shown only the biger edge box. I do not find the contoured box like pictured box shown in # 5. Note: The deliver adress is in Germany!
__________________
Beste Gruesse aus Deutschland, Werner Ford Model A, Roadster, 1928 Citroen 11 CV, 1947 Hercules W 2000, 1976; (with NSU-Wankel Rotary Engine), Canadian version |
|
10-24-2019, 10:50 AM | #20 |
Senior Member
Join Date: May 2010
Location: Alabama
Posts: 8,099
|
Re: Front Tool Box
The problem for me would be that the hand crank would no longer be able to be used .
I like to use my hand crank to show off if nothing else . The hand crank is part of the model A experience that I wouldn't consider giving up !!! No harm meant to those that like the tool box . Just my thought . |
|
|
Sponsored Links (Register now to hide all advertisements) |
|