The Ford Barn

green50 · 02-13-2017, 11:56 AM

Saw these on C/L, thought I would share.

https://knoxville.craigslist.org/pts/5961130816.html

rotorwrench · 02-13-2017, 01:37 PM

Those don't really look like very good molds. They should have a better flanges around the outside edges. The surfaces don't look very smooth either. Folks have been trying to replicate stuff on their own for ages though. That was someones attempt at it at one time or another.

JSeery · 02-13-2017, 01:55 PM

Sponsored Links (Register now to hide all advertisements)

The seller is not claiming they are useable, he is calling them wall hangers or decorative seems to me. Says they need repaired to be functional which is most likely a big understatement!

02-13-2017, 11:56 AM	#1
green50 Senior Member Join Date: Dec 2013 Location: North Georgia Posts: 392	1932 Ford fender molds Saw these on C/L, thought I would share. https://knoxville.craigslist.org/pts/5961130816.html __________________ Gene

02-13-2017, 01:37 PM	#2
rotorwrench Senior Member Join Date: Jun 2010 Location: San Antonio, Texas Posts: 16,416	Re: 1932 Ford fender molds Those don't really look like very good molds. They should have a better flanges around the outside edges. The surfaces don't look very smooth either. Folks have been trying to replicate stuff on their own for ages though. That was someones attempt at it at one time or another.

02-13-2017, 01:55 PM	#3
JSeery Member Emeritus Join Date: Nov 2012 Location: Wichita KS Posts: 16,132	Re: 1932 Ford fender molds Sponsored Links (Register now to hide all advertisements) The seller is not claiming they are useable, he is calling them wall hangers or decorative seems to me. Says they need repaired to be functional which is most likely a big understatement!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode