|
09-22-2013, 09:12 AM | #1 |
Senior Member
Join Date: May 2010
Location: Ashland KY
Posts: 1,159
|
Dyna beads
Do the dyna beads work as good as advertised? Using 600-16 tires on a 35 roadster.can't really get the vibration out around 55 mph, thought I might try the beads.
__________________
DON P |
09-22-2013, 11:23 AM | #2 |
Senior Member
Join Date: May 2010
Location: Lehighton Pa
Posts: 1,085
|
Re: Dyna beads
I used dynamic beads in a mod A .PITA if you get a flat need special valve cores.As far as I am concerned not worth the trouble. Phil
Last edited by trainguy; 09-22-2013 at 01:12 PM. |
Sponsored Links (Register now to hide all advertisements) |
|
09-22-2013, 11:31 AM | #3 |
Senior Member
Join Date: May 2010
Location: Gerrardstown, WV
Posts: 2,265
|
Re: Dyna beads
They work great in commercial tires-12x22.5.
|
09-22-2013, 08:04 PM | #4 |
Senior Member
Join Date: May 2010
Location: Oakdale,Ca
Posts: 1,323
|
Re: Dyna beads
I'll 2nd that...but add I run 10.00-22.5's
I also picked up a bag from a shop that I buy my recaps from...was surprised to find out it was a bag of powder they put in and it forms "beads/balls"...being the tightwad I am, I bought my own tires for my MotorHome and mounted them myself, then added the recommended amount for my tire size...after about 10 minutes of driving, all shakes ceased. |
09-22-2013, 12:17 PM | #5 |
Member
Join Date: Jul 2010
Location: Wheatfield,IN
Posts: 49
|
Re: Dyna beads
I use dyna beads in my 67 Mustang with after market wheels that could not get balanced. Made a huge difference. Did not need special valve stems. Also use them in my car trailer tires. I am very happy with them. Dave c
|
09-23-2013, 06:05 AM | #6 |
Member
Join Date: Nov 2011
Location: Wilmington New York
Posts: 94
|
Re: Dyna beads
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|