Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 07-22-2020, 10:10 AM   #1
Licensed to kill
Senior Member
 
Licensed to kill's Avatar
 
Join Date: Aug 2016
Location: Alberta
Posts: 930
Default How common a practice is this?.

I saw a model A for sale the other day and in the description it stated, "has 8 volt battery to spin it over faster". I never thought of that before, but, then again, I'm quite content with the 6V. I doubt that an 8V battery would cause any issues with the rest of the systems, IE lights, horn, generator, ignition system ETC. Anyone else running an 8V battery in their 6V system?. I'm not interested in doing it, just interested in the concept.
Licensed to kill is offline   Reply With Quote
Old 07-22-2020, 10:16 AM   #2
katy
Senior Member
 
katy's Avatar
 
Join Date: Jun 2015
Location: Red Deer, Alberta
Posts: 5,004
Default Re: How common a practice is this?.

8 volt battery is a band-aid fix for slow cranking, instead of fixing the problem. It was done a fair bit "back in the day".
__________________
If you don't hear a rumor by 10 AM, start one!.
Got my education out behind the barn!
katy is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 07-22-2020, 10:18 AM   #3
talwrench
Member
 
Join Date: Feb 2015
Location: Quakertown, PA
Posts: 73
Default Re: How common a practice is this?.

Years ago I bought a 30 PU with and 8 volt battery. Could not keep lamps lit,, filaments always burned out. Change battery to 6 volt.
talwrench is offline   Reply With Quote
Old 07-22-2020, 11:13 AM   #4
TMarsh
Senior Member
 
Join Date: Jun 2019
Posts: 130
Default Re: How common a practice is this?.

Father had a 50 model Ford, one 6 volt light, one 12 volt headlight, 8 volt battery, could always spot him at night.
TMarsh is offline   Reply With Quote
Old 07-22-2020, 11:47 AM   #5
John
Senior Member
 
John's Avatar
 
Join Date: May 2010
Location: Richmond, VA
Posts: 187
Default Re: How common a practice is this?.

Years ago when my Father had a '53 Chevrolet that turned over very slowly even after the installation of a new starter, the mechanic installed an 8 volt battery that helped a bit. Some time later when the timing gear was replaced, the slow turning over problem went away. Later, a 6 volt battery was installed and all was fine.
John is offline   Reply With Quote
Old 07-22-2020, 12:09 PM   #6
Tacoma Bob
Senior Member
 
Tacoma Bob's Avatar
 
Join Date: May 2010
Location: Tacoma, WA
Posts: 1,025
Default Re: How common a practice is this?.

Sponsored Links (Register now to hide all advertisements)
Ran one in high school in a 53 caddie. More trouble than it was worth.
Tacoma Bob is offline   Reply With Quote
Old 07-22-2020, 12:22 PM   #7
MAG
Senior Member
 
MAG's Avatar
 
Join Date: May 2010
Location: Austin, Texas
Posts: 925
Default Re: How common a practice is this?.

Had one years ago. Couldn't keep light bulbs in it.
__________________
I noticed the harder I work the luckier I get!
MAG is offline   Reply With Quote
Old 07-22-2020, 12:24 PM   #8
Big hammer
Senior Member
 
Join Date: Jun 2014
Location: Land of Lincoln
Posts: 3,114
Default Re: How common a practice is this?.

My A came with a 8 volt battery gm generator and the battery was always dead. How do you charge an 8 volt battery with 6/12 volt charge, I charged 3 cells on 6 volts then the last cell with 2 cells already charged. It was good thing I was young because I was push starting the car a lot, had to do what I could so I could drive it! The good old days !
__________________
Don't force it with a little hammer tap, tap, tap
get a bigger hammer tap done
Big hammer is offline   Reply With Quote
Old 07-22-2020, 12:57 PM   #9
Patrick L.
Senior Member
 
Patrick L.'s Avatar
 
Join Date: May 2010
Location: Largo Florida
Posts: 7,225
Default Re: How common a practice is this?.

As said, 8v were kinda common bandaids in the day. Those batteries tried to take the place of poor worn starters and bad grounds. 6v lights do not like 8v batteries, neither do 12v lights for that matter.
Patrick L. is offline   Reply With Quote
Old 07-22-2020, 12:58 PM   #10
Bill G
Senior Member
 
Bill G's Avatar
 
Join Date: Jun 2017
Location: Walla Walla, WA
Posts: 1,044
Default Re: How common a practice is this?.

People always want to reinvent the Model A to "make it better". My opinion: Those extra two volts don't get you much other than shorter light bulb life.
Bill G is offline   Reply With Quote
Old 07-22-2020, 08:12 PM   #11
Chris Haynes
Senior Member
 
Chris Haynes's Avatar
 
Join Date: May 2010
Location: Camarillo, CA and Pine Grove, CA
Posts: 2,830
Default Re: How common a practice is this?.

I once had a battery that was both 6v and 12v. It had a solenoid that supplied 12 volts to the starter and the rest of the car was 6v.
__________________
1921 Runabout
1930 Tudor
Early 1930 AA
Speed costs money. How fast do you want to go?
Chris Haynes is offline   Reply With Quote
Old 07-22-2020, 09:12 PM   #12
redmodelt
Senior Member
 
redmodelt's Avatar
 
Join Date: May 2010
Location: Portland OR
Posts: 6,339
Default Re: How common a practice is this?.

Back in the day, that would be today still. Not that uncommon on 6 volt cars, trucks and tractors. Most that come here asking get pointed in the right direction, but for every one that does, how many don't and put one in?
__________________
I know the voices aren't real but damn they have some good ideas!
redmodelt is offline   Reply With Quote
Old 07-22-2020, 10:33 PM   #13
Jack Shaft
BANNED
 
Join Date: Dec 2019
Posts: 1,196
Default Re: How common a practice is this?.

8v? no 12v? yes..modern fuse protected relay controlled circuits? yes.




Does it 'improve' the stock A? something shorts on this system a fuse blows..something shorts on the stock A the wiring burns..
Jack Shaft is offline   Reply With Quote
Old 07-23-2020, 09:52 AM   #14
rotorwrench
Senior Member
 
rotorwrench's Avatar
 
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,367
Default Re: How common a practice is this?.

As long as you know what the circuits are. The next owner will scratch his head a lot unless there is a diagram.
rotorwrench is offline   Reply With Quote
Old 07-23-2020, 01:40 PM   #15
Jack Shaft
BANNED
 
Join Date: Dec 2019
Posts: 1,196
Default Re: How common a practice is this?.

Thats the thing about building to suit yourself,resale isn't a factor
Jack Shaft is offline   Reply With Quote
Old 07-23-2020, 02:05 PM   #16
Benson
Senior Member
 
Join Date: May 2010
Posts: 2,579
Default Re: How common a practice is this?.

Photo 13:

That wire job looks logical, well done and neat!

In 1964 I bought a 34 Chevy PU which was re-wired without using a wire loom!


The Kicker was every wire was same gauge AND all were BLUE in color!!

None of the wires were bundled together.

Luckily the guy who bought it did not look under the dash!

I sold it to a used car salesman who lived up to the reputation of a used car salesman in every way.

Last edited by Benson; 07-23-2020 at 02:12 PM.
Benson is offline   Reply With Quote
Old 07-23-2020, 02:27 PM   #17
Jack Shaft
BANNED
 
Join Date: Dec 2019
Posts: 1,196
Default Re: How common a practice is this?.

Quote:
Originally Posted by Benson View Post
Photo 13:

That wire job looks logical, well done and neat!

In 1964 I bought a 34 Chevy PU which was re-wired without using a wire loom!


The Kicker was every wire was same gauge AND all were BLUE in color!!

None of the wires were bundled together.

Luckily the guy who bought it did not look under the dash!

I sold it to a used car salesman who lived up to the reputation of a used car salesman in every way.
and it works too!!!

Jack Shaft is offline   Reply With Quote
Old 07-24-2020, 08:25 AM   #18
Pat/Ohio
Senior Member
 
Pat/Ohio's Avatar
 
Join Date: May 2010
Location: Wilmington, OH/Lakeland, FL
Posts: 950
Default Re: How common a practice is this?.

A lot of Classic Car dealers will install 8V batteries to make certain the car would crank and start quicker. I purchased a real nice '40 Ford Conv. several years ago from a dealer and it had an 8V battery installed. Removed it when I got home in favor of a 6V battery. Better to fix the problem instead of installing an 8V battery.

Stay Safe,
Pat
Pat/Ohio is offline   Reply With Quote
Old 07-24-2020, 10:50 AM   #19
Purdy Swoft
Senior Member
 
Purdy Swoft's Avatar
 
Join Date: May 2010
Location: Alabama
Posts: 8,099
Default Re: How common a practice is this?.

I've never used an 8 volt battery in any of my model A's . My dads old jeep had an 8 volt battery and I never had a problem with it . When it was time to replace the old 8 volt battery , I replaced it with a 6 volt battery without any modification and it still worked good . I much prefer converting to twelve volts .I use the original color coded wiring harnesses from the vendors without modification . The original style wiring is LARGER gauge than the wiring commonly used on twelve volt systems . The larger gauge wiring used in the model A will carry 12 volts with no problem if in good condition .The modification that I make is to use a three OHM coil . The original style one point five Ohm coil can be used on 12 volts if a resistor is used at the coil connections but the distributor will still be operating on 6 volts . I prefer the distributor to also operate on 12 volts as well as the starter and lights . As long as the system remains positive ground , no wiring changes will be needed . It will be necessary to replace the battery and bulbs with 12 volt bulbs and battery . This is a very simple conversion . If negative ground is used , it will be necessary to swap the cables on the battery and the wire connections at the coil . The original unmodified generator will work well on 12 volts and the amperage output can be increased by pushing downward on the adjustable generator brush . The generator charges the battery in amps . The battery that is used will control the voltage of the vehicle that it is used on . Unless the more powerful 60 watt headlamp bulbs are used , the so called six volt generator will charge the battery just fine . The original unmodified starter will work well on 12 volts . The original starter is very robust . I've seen original model A starters used to operate as home made wrecker wenches on twelve volts . .

Last edited by Purdy Swoft; 07-24-2020 at 11:15 AM.
Purdy Swoft is offline   Reply With Quote
Old 07-24-2020, 01:24 PM   #20
Patrick L.
Senior Member
 
Patrick L.'s Avatar
 
Join Date: May 2010
Location: Largo Florida
Posts: 7,225
Default Re: How common a practice is this?.

Quote:
Originally Posted by Benson View Post
Photo 13:

That wire job looks logical, well done and neat!

In 1964 I bought a 34 Chevy PU which was re-wired without using a wire loom!


The Kicker was every wire was same gauge AND all were BLUE in color!!

None of the wires were bundled together.

Luckily the guy who bought it did not look under the dash!

I sold it to a used car salesman who lived up to the reputation of a used car salesman in every way.






Not all makers have/had color coded wires. Some had tracers, others [ International] had numbers.

Try finding the number on a 10 year old wire while you're standing on your head looking under a dash.
Patrick L. is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 03:56 AM.