|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
02-21-2020, 09:05 AM | #1 |
Senior Member
Join Date: May 2010
Location: Washington Cty., ME or Flagler Cty., FL
Posts: 1,106
|
Installing a winshield wiper arm and blade
This has got to be the easiest job on a Model A. I am using the 8 in. original style on a Victoria with a Trico blade. The arm seems fine but the blade is very loose on the bent wire arm. It is a major distraction while driving with the wind blowing the blade. Is the blade attachment supposed to be crimped to make it tighter?
|
02-21-2020, 01:37 PM | #2 |
Senior Member
Join Date: May 2010
Location: Clinton,WA/Whidbey Island
Posts: 4,104
|
Re: Installing a winshield wiper arm and blade
no but if the groove on the wiper stub is worn the wiper arm may be lose?
__________________
www.whidbeymodelaclub.com |
Sponsored Links (Register now to hide all advertisements) |
|
02-21-2020, 02:19 PM | #3 |
Senior Member
Join Date: Feb 2014
Location: Lake Mills, WI
Posts: 251
|
Re: Installing a winshield wiper arm and blade
Sponsored Links (Register now to hide all advertisements)
__________________
Always one bad decision away from a good time. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|