10-28-2016, 10:13 AM | #1 |
Senior Member
Join Date: Dec 2012
Location: Payette, ID
Posts: 936
|
59A into a 32
I am putting a 59A into my 32 chassis. What is the dimension from the top of the front frame rail tot he center line of the crank nut.
Tim |
10-28-2016, 11:08 AM | #2 |
Senior Member
Join Date: Oct 2011
Location: Shelton, WA
Posts: 3,800
|
Re: 59A into a 32
You can put the crank saddle/u-bolt bracket on the front cross member and the crank nut should line up dead center of the crank hole. No measurement needed.
Did this for both my avatar roadster and 5w that have 59 series engines. |
Sponsored Links (Register now to hide all advertisements) |
|
10-28-2016, 11:17 AM | #3 |
Senior Member
Join Date: May 2010
Location: Rogersville, TN
Posts: 797
|
Re: 59A into a 32
^^^^^^ what he said. If you don't have the u-bolt bracket, set the radiator and shell in place and stick a dowel or the hand crank through and you have it. Are you using the original style V8 block to crossmember mounts or hot rod style bolt/weld in frame mounts?
Last edited by hotrodA; 10-28-2016 at 11:29 AM. |
10-28-2016, 11:34 AM | #4 |
Senior Member
Join Date: Dec 2012
Location: Payette, ID
Posts: 936
|
Re: 59A into a 32
The Ford frame has a Model A front cross member. Using later V-8 Front mounts to weld in motor mounts.
Tim |
10-28-2016, 11:50 AM | #5 |
Senior Member
Join Date: May 2010
Location: Rogersville, TN
Posts: 797
|
Re: 59A into a 32
Here's a better pic. The top of the biscuit is level with the frame top rail. Don't know why the pics get flipped on the side.
|
10-28-2016, 04:08 PM | #6 |
Member Emeritus
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
|
Re: 59A into a 32
Sponsored Links (Register now to hide all advertisements)
|
10-28-2016, 06:07 PM | #7 |
Senior Member
Join Date: Dec 2012
Location: Payette, ID
Posts: 936
|
Re: 59A into a 32
Much better and thanks for the info
Tim |
|
|
Sponsored Links (Register now to hide all advertisements) |
|