Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 05-29-2011, 08:38 AM   #1
Wagga A'er
Member
 
Join Date: Jul 2010
Location: Wagga Wagga - Australia
Posts: 78
Default Engine rebore

I want to rebuild my current engine as its number matches the firewall date. It has been previously bored out to .060 oversized. However it has two cylinders that are sloppy. I have bored it out to .080 and it still has marks in the bore. Would you bore it out more or put cylinder sleeves in the cylinder and go back to standard? I am worried about overheating problems. Your thoughts would be greatly appreciated.
Wagga A'er is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 08:19 AM.