|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
02-25-2020, 02:32 PM | #1 |
Junior Member
Join Date: Feb 2018
Location: PA
Posts: 24
|
Flathead fan bracket question
I am in the process of building my 34 pickup and need to nail down the fan I will be using on the flathead. I want to use a bracket off the intake to carry the fan and also function as the belt tensioner but can't find one with a single hole. Does anyone know if Ford made a single hole bracket? The generator brackets had 1 hole. I did find a fan carrier bracket made by Offenhauser (#3499) but was hoping to find a Ford part.
For reference, I am running a french flathead block with a Navarro 3x2 intake. The block in the picture is for mock up only. |
02-25-2020, 02:54 PM | #2 |
Senior Member
Join Date: Apr 2015
Location: Sweden
Posts: 3,045
|
Re: Flathead fan bracket question
Offenhauser has the fancarrier bracket.
Not sure of anything else around stock. |
Sponsored Links (Register now to hide all advertisements) |
|
02-25-2020, 05:05 PM | #3 |
Member Emeritus
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
|
Re: Flathead fan bracket question
Sponsored Links (Register now to hide all advertisements)
Last edited by JSeery; 02-25-2020 at 05:16 PM. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|