Go Back   The Ford Barn > The Swap Meet > For Sale > Early V8

Sponsored Links (Register now to hide all advertisements)

Closed Thread
 
Thread Tools Display Modes
Old 12-04-2010, 05:23 PM   #121
trulyvintage
Senior Member
 
trulyvintage's Avatar
 
Join Date: May 2010
Location: Direct Enclosed Transport Since 2006
Posts: 4,133
Thumbs up Re: If you need a haul for your project - parts - completed Ford

Quote:
Originally Posted by OLDBULL8 View Post
Jim; Towcat is in Santa Clara, just West of San Jose if you still need assistance with the fuel leak.

Bill
Hi Bill

Welcome to FordBarn .....

I will keep Towcat in mind - still driving thru snow - now in Montana


Jim
trulyvintage is offline  
Old 12-04-2010, 05:24 PM   #122
trulyvintage
Senior Member
 
trulyvintage's Avatar
 
Join Date: May 2010
Location: Direct Enclosed Transport Since 2006
Posts: 4,133
Thumbs up Moving on - check the next post .....

Moved on - check the next post


December 5th


15 feet w/ 4000 pound capacity available
from Billings, MT to Anacortes, WA

Here is my route @ http://mapq.st/h/4-U6COaxVH



Jim
(260) 804-6695

Last edited by trulyvintage; 02-22-2011 at 04:47 AM.
trulyvintage is offline  
Sponsored Links (Register now to hide all advertisements)
Old 12-07-2010, 03:03 AM   #123
ron hebb
Member
 
Join Date: May 2010
Posts: 59
Default Re: If you need a haul for your project - parts - completed Ford

HI jim
got a set of doors in spokane
email [email protected]
ph 902 522 2632 or 902 221 4626
ron hebb is offline  
Old 12-07-2010, 10:25 PM   #124
trulyvintage
Senior Member
 
trulyvintage's Avatar
 
Join Date: May 2010
Location: Direct Enclosed Transport Since 2006
Posts: 4,133
Thumbs up Already in Seattle ....

Quote:
Originally Posted by ron hebb View Post
HI jim
got a set of doors in spokane
email [email protected]
ph 902 522 2632 or 902 221 4626
Sorry,

I am already in Seattle, WA


Jim
trulyvintage is offline  
Old 12-07-2010, 10:27 PM   #125
trulyvintage
Senior Member
 
trulyvintage's Avatar
 
Join Date: May 2010
Location: Direct Enclosed Transport Since 2006
Posts: 4,133
Thumbs up Moving on - check the next post .....

Moved on - check the next post


December 8th


Ford car & truck transport available

I even haul Dodge Power Wagons

36 feet w/ 10,000 pound capacity to safely transport
your car or truck from Seattle, WA & Portland, OR
east to the Midwest or East Coast

Safe daylight hauling at 55 m.p.h.

Soft ties to the axle or frame

Up to 100 inch wide tire width

No deposit required - you pay at drop off

On the road now solid since September 2009


Jim
(260) 804-6695
Attached Images
File Type: jpg TPowerWagonPines.jpg (72.8 KB, 10 views)

Last edited by trulyvintage; 02-22-2011 at 04:48 AM.
trulyvintage is offline  
Old 12-09-2010, 05:52 PM   #126
trulyvintage
Senior Member
 
trulyvintage's Avatar
 
Join Date: May 2010
Location: Direct Enclosed Transport Since 2006
Posts: 4,133
Thumbs up Moving on - check the next post .....

Sponsored Links (Register now to hide all advertisements)
Moved on - check the next post


December 9th & 10th


17 feet of Ford vehicle transport space available
from Grants Pass, OR 97527 to East Northport, NY 11731

4500 pound capacity

I can pick up in Northern California along I-5
all the way down to I-80

Jim
(260) 804-6695
Attached Images
File Type: jpg TJimsBar.jpg (51.8 KB, 9 views)

Last edited by trulyvintage; 02-22-2011 at 04:48 AM.
trulyvintage is offline  
Old 12-10-2010, 08:56 AM   #127
trulyvintage
Senior Member
 
trulyvintage's Avatar
 
Join Date: May 2010
Location: Direct Enclosed Transport Since 2006
Posts: 4,133
Thumbs up Moving on - check the next post .....

Moved on - check the next post


December 23rd


Around December 23rd I will be leaving
East Northport, NY 11731
and heading to the West Coast

34 feet w/ 10,000 pound capacity
available for Ford vehicle transport

Daylight driving at 55 m.p.h.

Up to 100 inches wide outside
tire to outside tire

Lifted - oversized tires - no problem

No deposit required

10K electric winch
Cushioned white oak deck
Dexter E-Z Flex suspension

Please call Jim
(260) 804-6695

Last edited by trulyvintage; 02-22-2011 at 04:49 AM.
trulyvintage is offline  
Old 12-12-2010, 09:55 AM   #128
trulyvintage
Senior Member
 
trulyvintage's Avatar
 
Join Date: May 2010
Location: Direct Enclosed Transport Since 2006
Posts: 4,133
Thumbs up Moving on - check the next post .....

Moved on - check the next post


December 13th


17 feet of room with 4500 pound capacity
available eastbound from Salt Lake City, UT
along I-80 to East Northport, NY 11731
to safely transport your Ford car or truck


Jim
(260) 804-6695

Last edited by trulyvintage; 02-22-2011 at 04:49 AM.
trulyvintage is offline  
Old 12-13-2010, 10:33 AM   #129
trulyvintage
Senior Member
 
trulyvintage's Avatar
 
Join Date: May 2010
Location: Direct Enclosed Transport Since 2006
Posts: 4,133
Thumbs up Moving on - check the next post .....

Moved on - check the next post


December 23rd


From East Northport, NY 11731

34 feet of Ford car or truck transport space available
to Arizona - California - Oregon - Washington

10,000 pound capacity

Daylight driving at 55 m.p.h.

Soft ties to the axle & frame

No deposit required



Jim
(260) 804-6695

Last edited by trulyvintage; 02-22-2011 at 04:50 AM.
trulyvintage is offline  
Old 12-15-2010, 04:13 AM   #130
trulyvintage
Senior Member
 
trulyvintage's Avatar
 
Join Date: May 2010
Location: Direct Enclosed Transport Since 2006
Posts: 4,133
Thumbs up Moving on - check the next post .....

Moved on - check the next post


December 15th


Limited room to haul Ford parts

Eastbound on I-80 from Grand Island, Nebraska to Coatesville, PA

Must be along my route @ http://mapq.st/h/3-De3do770


Jim
(260) 804-6695

Last edited by trulyvintage; 02-22-2011 at 04:50 AM.
trulyvintage is offline  
Old 12-18-2010, 08:09 PM   #131
trulyvintage
Senior Member
 
trulyvintage's Avatar
 
Join Date: May 2010
Location: Direct Enclosed Transport Since 2006
Posts: 4,133
Thumbs up Moving on - check the next post .....

Moved on - check the next post


December 19th


Limited room for parts transport
on my trailer is available all along
the following route:

Jersey City, NJ 07305 up to Harpursville, NY 13787

Continuing to Coatesville, PA 19320

From there I am going to Greencastle, PA 17225

Continuing to Montrose, MO 64770

Space is limited - your pick up & drop off must be directly along my route

Check MapQuest


Jim
(260) 804-6695

Last edited by trulyvintage; 02-22-2011 at 04:51 AM.
trulyvintage is offline  
Old 12-19-2010, 10:35 PM   #132
trulyvintage
Senior Member
 
trulyvintage's Avatar
 
Join Date: May 2010
Location: Direct Enclosed Transport Since 2006
Posts: 4,133
Thumbs up Moving on - check the next post .....

Moved on - check the next post


January 1st


Ford vehicle transport

17 feet with 5500 pound capacity available from
Montrose, MO 64770 to Culdesac, ID 83524

Here is my route @ http://mapq.st/9-iHKvNrYB

I can continue from Culdesac, ID 83524 to Washington or Oregon ........


Jim
(260) 804-6695
Attached Images
File Type: jpg TBronx.jpg (69.1 KB, 16 views)

Last edited by trulyvintage; 02-22-2011 at 04:51 AM.
trulyvintage is offline  
Old 12-23-2010, 09:53 PM   #133
trulyvintage
Senior Member
 
trulyvintage's Avatar
 
Join Date: May 2010
Location: Direct Enclosed Transport Since 2006
Posts: 4,133
Thumbs up Moving on - check the next post .....

Moved on - check the next post


December 26th


17 feet of Ford vehicle transport space available

Montrose, MO 64770 to Culdesac, ID 83524

My route @ http://mapq.st/gNOurj

Then

34 feet of Ford vehicle transport space available

Culdesac, ID 83524 to Rochester, WA 98579

My route @ http://mapq.st/geBCLI

Then

17 feet of Ford vehicle transport space available

Rochester, WA 98579 to Ballwin, MO 63021

My route @ http://mapq.st/fun8Gu



Jim
(260) 804-6695
Attached Images
File Type: jpg TJoeWagon.jpg (73.7 KB, 11 views)

Last edited by trulyvintage; 02-22-2011 at 04:52 AM.
trulyvintage is offline  
Old 12-27-2010, 10:29 AM   #134
trulyvintage
Senior Member
 
trulyvintage's Avatar
 
Join Date: May 2010
Location: Direct Enclosed Transport Since 2006
Posts: 4,133
Thumbs up Moving on - check the next post .....

Moved on - check the next post


December 27th


Leaving this morning from St. Joseph, MO 64507

Space is still available


Jim
(260) 804-6695

Last edited by trulyvintage; 02-22-2011 at 04:52 AM.
trulyvintage is offline  
Old 12-28-2010, 07:37 PM   #135
trulyvintage
Senior Member
 
trulyvintage's Avatar
 
Join Date: May 2010
Location: Direct Enclosed Transport Since 2006
Posts: 4,133
Thumbs up Moving on - check the next post .....

Moved on - check the next post


January 1st


17 feet of vehicle transport space available
Salt Lake City, UT to Culdesac, ID 83524

My route @ http://mapq.st/fauHm8

Then

34 feet of vehicle transport space available
Culdesac, ID 83524 to Rochester, WA 98579

My route @ http://mapq.st/geBCLI

Then

17 feet of vehicle transport space available
Rochester, WA 98579 to Ballwin, MO 63021

My route @ http://mapq.st/fun8Gu


Jim
(260) 804-6695

Last edited by trulyvintage; 02-22-2011 at 04:53 AM.
trulyvintage is offline  
Old 01-01-2011, 10:28 PM   #136
trulyvintage
Senior Member
 
trulyvintage's Avatar
 
Join Date: May 2010
Location: Direct Enclosed Transport Since 2006
Posts: 4,133
Thumbs up Moving on - check the next post .....

Moved on - check the next post


January 4th


17 feet w/ 5500 pound capacity available
for Ford transport from Salt Lake City, UT
up to Culdesac, ID 83524

My route @ http://classic.mapquest.com/mq/1-MAPYJnG_UEQg

Continuing from Culdesac, ID 83524 to Rochester, WA 98579
with 34 feet & 10,000 pound capacity available for Ford hauling

My route @ http://classic.mapquest.com/mq/9-Hw8W


Jim
(260) 804-6695
Attached Images
File Type: jpg TDinerCorvette.jpg (18.4 KB, 5 views)

Last edited by trulyvintage; 02-22-2011 at 04:53 AM.
trulyvintage is offline  
Old 01-04-2011, 10:09 AM   #137
trulyvintage
Senior Member
 
trulyvintage's Avatar
 
Join Date: May 2010
Location: Direct Enclosed Transport Since 2006
Posts: 4,133
Thumbs up Moving on - check the next post .....

Moved on - check the next post


January 10th


Vehicle transport

I will be leaving Rochester, WA for Missouri
I can route down I-5 along the West Coast

I will have 17 feet of room available
with 5500 pound capacity for vehicle transport

I can continue east from Missouri to the East Coast
from Washington - Oregon - California for vehicle transport



Jim
(260) 804-6695
Attached Images
File Type: jpg T55NewYorker.jpg (48.3 KB, 7 views)

Last edited by trulyvintage; 02-22-2011 at 04:53 AM.
trulyvintage is offline  
Old 01-05-2011, 10:27 PM   #138
trulyvintage
Senior Member
 
trulyvintage's Avatar
 
Join Date: May 2010
Location: Direct Enclosed Transport Since 2006
Posts: 4,133
Thumbs up Moving on - check the next post .....

Moved on - check the next post


January 7th


17 feet w/ 5500 pound capacity available
for Ford vehicle transport from
Rochester, WA 98579 to Rapid City, SD 57701

My route @ http://mapq.st/e3iHzq



Jim
(260) 804-6695
Attached Images
File Type: jpg TGlennsergeant.jpg (68.4 KB, 783 views)

Last edited by trulyvintage; 02-22-2011 at 04:54 AM.
trulyvintage is offline  
Old 01-11-2011, 06:09 PM   #139
trulyvintage
Senior Member
 
trulyvintage's Avatar
 
Join Date: May 2010
Location: Direct Enclosed Transport Since 2006
Posts: 4,133
Thumbs up Moving on - check the next post .....

Moved on - check the next post


January 17th


18 feet of transport space available
with 6000 pound capacity from
Ballwin, MO 63021 to Canal Winchester, OH 43110

My route @ http://mapq.st/fJA1nZ

Jim
(260) 804-6695

Last edited by trulyvintage; 02-22-2011 at 04:54 AM.
trulyvintage is offline  
Old 01-15-2011, 07:39 AM   #140
trulyvintage
Senior Member
 
trulyvintage's Avatar
 
Join Date: May 2010
Location: Direct Enclosed Transport Since 2006
Posts: 4,133
Thumbs up Moving on - check the next post .....

Moved on - check the next post


January 24th


Car transport for your Ford or your muscle car

17 feet of room available w/ 5000 pound capacity
from Canal Winchester, OH 43110 west along I-70
thru Indiana to Littleton, CO 80127

My route @ http://mapq.st/ga9ORC


Jim
(260) 804-6695
Attached Images
File Type: jpg T70Challenger.jpg (116.5 KB, 4 views)

Last edited by trulyvintage; 02-22-2011 at 04:55 AM.
trulyvintage is offline  
Closed Thread

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 01:43 PM.