The Ford Barn

Angledrive · 02-16-2019, 06:56 PM

You would be far better to assemble both bearings and set the preload before you drop it in place, Sometimes I have to reset the preload after I insert it in banjo.

quickchange34 · 02-16-2019, 09:41 PM

Look inside the the case where the pinion lives there is a step there that the rear of the pinion race goes against . The front of the race is inline with the machine surface of the case in front.

cederholm · 02-17-2019, 08:06 AM

Thanks guys - I have to research setting the pre-load.

Sent from my iPhone using Tapatalk

02-16-2019, 06:56 PM	#21
Angledrive Senior Member Join Date: May 2010 Location: Lakeland Florida Posts: 303	Re: Double bearing pinion sleeve imstall You would be far better to assemble both bearings and set the preload before you drop it in place, Sometimes I have to reset the preload after I insert it in banjo.

02-16-2019, 09:41 PM	#22
quickchange34 Senior Member Join Date: May 2010 Location: charlottesville, Va. Posts: 589	Re: Double bearing pinion sleeve imstall Look inside the the case where the pinion lives there is a step there that the rear of the pinion race goes against . The front of the race is inline with the machine surface of the case in front.

02-17-2019, 08:06 AM	#23
cederholm Senior Member Join Date: Jun 2017 Location: Southport CT Posts: 318	Re: Double bearing pinion sleeve imstall Thanks guys - I have to research setting the pre-load. Sent from my iPhone using Tapatalk