Fulton Wind Deflectors

[Bob Bidonde]

I have a set of reproduction clamp-on type Fulton Wind Deflector brackets that I would like to use on my Victoria because they do not require drilling holes in the doors.

Are there any issues using these on a slant windshield car?
Is there a pattern for the glass?

Will appreciate photos of these wind deflectors on slant windshield cars.

[duke36]

One mounts them to the window head and sill and then measure for the glass, approx 8"' wide + ht. to suit by using cardboard pattern. Front of glass aligns with front A pillar slope.
Problem is that brackets can leave indentations in the paint even with rubber gaskets.
The brackets must be kept tight or the glass will fall out.

[Bill Cilker]

Bob
My Victoria has had clamp on wind wings since new, I believe. I like them because I can easily take them off if necessary.
You will probably need to cut the glass at an angle.

Thanks for all you do for the Victoria Association.

[Bick in New Zealand]

Sponsored Links (Register now to hide all advertisements)

I have a feeling that the slant windows used a different version to what is available as a repro. The ones sold by A&L are excellent, I have a set on my coupe, but they can only used on coupes tudors etc.